Schmidt, Michael

2025

• Wittmann A., Alidoust Chamandani S., Hentschel O., Sommereyns A., Kopp SP., Schmidt M.:
  Functional polyetheretherketone coatings fabricated by laser-based directed energy deposition
  In: Surface & Coatings Technology 496 (2025), S. 131629
  ISSN: 0257-8972
  DOI: 10.1016/j.surfcoat.2024.131629

2024

• Bartels D., Heise M., Schmidt M.:
  Geometrical and Optical Properties of Optical Components Manufactured by Means of Stereolithography
  In: Optics 5 (2024), S. 611-621
  ISSN: 2673-3269
  DOI: 10.3390/opt5040045
• Bayat M., Zinovieva O., Zinoviev A., Rothfelder R., Schwarzkopf K., Schmidt M., Hattel JH.:
  Understanding the thermo-fluid-microstructural impact of beam shaping in Laser Powder Bed Fusion using high-fidelity multiphysics simulation
  13th CIRP Conference on Photonic Technologies, LANE 2024 (Fürth, 15. September 2024 - 19. September 2024)
  In: Michael Schmidt, C.B. Arnold, K. Wudy (Hrsg.): Procedia CIRP 2024
  DOI: 10.1016/j.procir.2024.08.133
• Boussinot G., Cazic I., Döring M., Schmidt M., Apel M.:
  Stabilization of the Ternary Eutectic Growth in Additively Manufactured Al-Ni-Ce Alloys
  In: Advanced Engineering Materials (2024)
  ISSN: 1438-1656
  DOI: 10.1002/adem.202401665
• Chechik L., Schmidt M.:
  Identification of a descriptive beam size metric for complex beam shapes
  In: Procedia CIRP 124 (2024), S. 737-740
  ISSN: 2212-8271
  DOI: 10.1016/j.procir.2024.08.214
• Chechik L., Schwarzkopf K., Rothfelder R., Grünewald J., Schmidt M.:
  Material Dependent Influence of Ring/Spot Beam Profiles in Laser Powder Bed Fusion
  In: Additive Manufacturing Letters (2024), S. 100211
  ISSN: 2772-3690
  DOI: 10.1016/j.addlet.2024.100211
• Forster C., Döring M., Spurk C., Hummel M., Olowinsky A., Beckmann F., Moosmann J., Schmidt M.:
  In-situ observation of end crater crack mechanisms in AA7075 during laser beam welding using synchrotron radiation
  13th CIRP Conference on Photonic Technologies, LANE 2024 (Furth, DEU, 15. September 2024 - 19. September 2024)
  In: Michael Schmidt, C.B. Arnold, K. Wudy (Hrsg.): Procedia CIRP 2024
  DOI: 10.1016/j.procir.2024.08.154
• Ghosh A., Hohmann M., Klämpfl F., Schmidt M.:
  Depth estimation in turbid media from stack of epi-illuminated microscopy images, using deep learning
  Tissue Optics and Photonics III 2024 (Strasbourg, FRA, 9. April 2024 - 11. April 2024)
  In: Valery V. Tuchin, Walter C. Blondel, Zeev Zalevsky (Hrsg.): Proceedings of SPIE - The International Society for Optical Engineering 2024
  DOI: 10.1117/12.3029573
• Hentschel O., Kohlstruck J., Vetter J., Wittmann A., Krakhmalev P., Nikas D., Schmidt M.:
  Experimental Investigations in the Processing of AISI H11 Powder Blends Enriched with Tungsten Carbide Nanoparticles for the Additive Manufacturing of Tailored Hot Working Tools in the Directed Energy Deposition (DED-LB/M)—Impact of Tungsten Carbide Nanoparticles on Microstructural and Mechanical Characteristics
  In: Metals 14 (2024), Art.Nr.: 188
  ISSN: 2075-4701
  DOI: 10.3390/met14020188
• Hohmann M., Kühn D., Ni D., Späth M., Ghosh A., Rohde M., Stelzle F., Klämpfl F., Schmidt M.:
  Relevant parameters for laser surgery of soft tissue
  In: Scientific Reports 14 (2024), Art.Nr.: 1263
  ISSN: 2045-2322
  DOI: 10.1038/s41598-024-51449-1
• Kaufmann F., Maier A., Schrauder J., Roth S., Schmidt M.:
  Influence of Laser Beam Intensity Distribution on Keyhole Geometry and Process Stability Using Green Laser Radiation
  32nd International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 2023 (Porto, 18. Juni 2023 - 22. Juni 2023)
  In: Francisco J. G. Silva, Raul D.S.G. Campilho, António B. Pereira (Hrsg.): Lecture Notes in Mechanical Engineering 2024
  DOI: 10.1007/978-3-031-38241-3_25
• Kaufmann F., Möttingdörfer R., Roth S., Schmidt M.:
  Investigation of coupling efficiency in laser beam welding of copper materials using brilliant infrared and green laser radiation
  In: Journal of Manufacturing Processes 131 (2024), S. 2037-2050
  ISSN: 1526-6125
  DOI: 10.1016/j.jmapro.2024.10.028
• Kaufmann F., Roth S., Schmidt M.:
  Tailored laser beam shapes for welding of copper using green laser radiation
  In: International Journal of Advanced Manufacturing Technology (2024)
  ISSN: 0268-3768
  DOI: 10.1007/s00170-024-13180-z
• Leupold S., Willeke M., Leong C., Stratmann N., Sommereyns A., Ziefub AR., Kopp SP., Barcikowski S., Schmidt M.:
  Correlation of optical energy onto nano-Additivated CuS/PA12 and LaB6/PA12 powder with depth of fusion in PBF-LB/P
  In: Procedia CIRP 124 (2024), S. 61-64
  ISSN: 2212-8271
  DOI: 10.1016/j.procir.2024.08.071
• Maier A., Rühr M., Tangermann-Gerk K., Stephan M., Roth S., Schmidt M.:
  Additive Manufacturing of Duplex Stainless Steel by DED-LB/M and PBF-LB/M – Process-material-property relationships
  In: Rapid Prototyping Journal 30 (2024), S. 1348-1364.
  ISSN: 1355-2546
  DOI: 10.1108/RPJ-02-2024-0099
  URL: https://www.emerald.com/insight/content/doi/10.1108/RPJ-02-2024-0099/full/html?skipTracking=true
• Maiwald F., Kroth L., Laskin A., Hierl S., Schmidt M.:
  Enlarging the process window in absorber-free laser transmission welding of polymer foils using tailored laser intensity distribution
  13th CIRP Conference on Photonic Technologies, LANE 2024 (Furth, DEU, 15. September 2024 - 19. September 2024)
  In: Michael Schmidt, C.B. Arnold, K. Wudy (Hrsg.): Procedia CIRP 2024
  DOI: 10.1016/j.procir.2024.08.159
• März R., Hetz P., Bartels D., Schmidt M., Merklein M.:
  Characterization of an additively manufactured coating using an upsetting test with miniaturized cylindrical specimen
  In: Proceedings of the Institution of Mechanical Engineers Part L-Journal of Materials-Design and Applications (2024)
  ISSN: 1464-4207
  DOI: 10.1177/14644207241277406
• Nahr F., Bartels D., Schäfle M., Kirchner E., Schmidt M.:
  Effect of laser defocusing on duplex stainless steels for higher scan speeds in Laser-Based Powder Bed Fusion (PBF-LB/M)
  13th CIRP Conference on Photonic Technologies, LANE 2024 (Furth, DEU, 15. September 2024 - 19. September 2024)
  In: Michael Schmidt, C.B. Arnold, K. Wudy (Hrsg.): Procedia CIRP 2024
  DOI: 10.1016/j.procir.2024.08.095
• Nahr F., Li B., Bartels D., Zhou K., Bartolo PJDS., Schmidt M.:
  Effect of NiO nanoparticles on duplex stainless steel processed via DED-LB and PBF-LB
  In: CIRP Annals - Manufacturing Technology (2024)
  ISSN: 0007-8506
  DOI: 10.1016/j.cirp.2024.04.020
• Nahr F., Novotny T., Kunz D., Kleinhans U., Chechik L., Bartels D., Schmidt M.:
  Advanced Process Control in Laser-Based Powder Bed Fusion – Smart Fusion Feedback-loop Control as a Path to Uniform Properties for Complex Structures?
  In: Journal of Materials Research and Technology (2024)
  ISSN: 2238-7854
  DOI: 10.1016/j.jmrt.2024.12.014
• Naser J., Sarau G., Wrege J., Schmidt M., Christiansen S.:
  Quick Large-Area Detection of Thin Silicone Films with Coherent Raman Scattering Imaging
  In: physica status solidi (a) (2024)
  ISSN: 1862-6300
  DOI: 10.1002/pssa.202300750
• Ni D., Klämpfl F., Schmidt M., Hohmann M.:
  Towards a sensing model using a random laser combined with diffuse reflectance spectroscopy
  In: Biomedical Optics Express 15 (2024), S. 4425-4437
  ISSN: 2156-7085
  DOI: 10.1364/BOE.525693
• Schmidt M., Cvecek K., Duflou J., Vollertsen F., Arnold CB., Matthews MJ.:
  Dynamic beam shaping—Improving laser materials processing via feature synchronous energy coupling
  In: CIRP Annals - Manufacturing Technology 73 (2024), S. 533-559
  ISSN: 0007-8506
  DOI: 10.1016/j.cirp.2024.05.005
• Schwarzkopf K., Burger S., Chechik L., Forster C., Döring M., Spurk C., Hummel M., Olowinsky A., Beckmann F., Moosmann J., Schmidt M.:
  Revealing the influence of ring-shaped beam profiles in high-speed laser beam microwelding by synchrotron x-ray imaging
  In: Journal of Laser Applications 36 (2024), Art.Nr.: 042027
  ISSN: 1042-346X
  DOI: 10.2351/7.0001582
• Sommereyns A., Leupold S., Rudlof F., Willeke M., Ghosh A., Ohannessian B., Merwin D., Elahi R., Barcikowski S., Vogel N., Schmidt M.:
  Light matters: Quantifiable optical interaction between near-infrared laser radiation and nano-additivated polymers in all states of matter present in laser powder bed fusion
  In: Additive Manufacturing (2024), Art.Nr.: 104211
  ISSN: 2214-7810
  DOI: 10.1016/j.addma.2024.104211
• Stephan M., Maier A., Tangermann-Gerk K., Frankl S., Röhr M., Roth S., Schmidt M.:
  DED-LB/M and in-situ alloying of a Co-Cr alloy with elemental powders: Defect formation, microstructure and mechanical properties
  13th CIRP Conference on Photonic Technologies, LANE 2024 (Furth, DEU, 15. September 2024 - 19. September 2024)
  In: Michael Schmidt, C.B. Arnold, K. Wudy (Hrsg.): Procedia CIRP 2024
  DOI: 10.1016/j.procir.2024.08.108
  URL: https://www.sciencedirect.com/science/article/pii/S2212827124004621
• Stratmann N., Willeke M., Leupold S., Schmidt M., Barcikowski S., Ziefuss AR.:
  Near-infrared surface sensitizing of PA12 to enable diode laser-based Powder Bed Fusion
  13th CIRP Conference on Photonic Technologies, LANE 2024 (Furth, DEU, 15. September 2024 - 19. September 2024)
  In: Michael Schmidt, C.B. Arnold, K. Wudy (Hrsg.): Procedia CIRP 2024
  DOI: 10.1016/j.procir.2024.08.073
• Vetter J., Beneder S., Schmidt M.:
  Material-Tailored tool inserts for injection moulding using material extrusion multi-material Additive Manufacturing
  13th CIRP Conference on Photonic Technologies, LANE 2024 (Fürth, 15. September 2024 - 19. September 2024)
  DOI: 10.1016/j.procir.2024.08.106
• Vetter J., Hentschel O., Chechik L., Schmidt M.:
  Interlayer-free laser coating of AISI H11 tool steel for H11/Cu composite material
  In: Journal of Laser Applications 36 (2024)
  ISSN: 1042-346X
  DOI: 10.2351/7.0001533
• Wittmann A., Meth C., Alidoust Chamandani S., Vetter J., Kopp SP., Schmidt M.:
  Additive manufacturing of polyamide 12 bulk structures using directed energy deposition with a thulium laser: Effect of process conditions on morphology and mechanical performance
  In: Journal of Laser Applications 36 (2024)
  ISSN: 1042-346X
  DOI: 10.2351/7.0001586

2023

• Ackermann L., Gehring M., Roider C., Cvecek K., Schmidt M.:
  Spot Arrays for Uniform Material Ablation with Ultrashort Pulsed Lasers
  In: Optics and Laser Technology 163 (2023), S. 109358
  ISSN: 0030-3992
  DOI: 10.1016/j.optlastec.2023.109358
  URL: https://www.sciencedirect.com/science/article/pii/S0030399223002517
• Ackermann L., Roider C., Cvecek K., Barré N., Aigner C., Schmidt M.:
  Polarization-Controlled Nonlinear Computer-Generated Holography
  In: Scientific Reports (2023), Art.Nr.: 10338
  ISSN: 2045-2322
  DOI: 10.1038/s41598-023-37443-z
  URL: https://www.nature.com/articles/s41598-023-37443-z
• Ackermann L., Roider C., Cvecek K., Barré N., Schmidt M.:
  Diminishing Speckle Noise During Nonlinear Phase-only Beam Shaping
  In: IEEE (Hrsg.): 2023 Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC), IEEE, 2023
  DOI: 10.1109/CLEO/Europe-EQEC57999.2023.10232165
  (anderer)
• Ackermann L., Roider C., Gehring M., Cvecek K., Schmidt M.:
  High-Speed Speckle Averaging for Phase-Only Beam Shaping in Laser Materials Processing
  In: Optics and Lasers in Engineering 165 (2023), Art.Nr.: 107537
  ISSN: 0143-8166
  DOI: 10.1016/j.optlaseng.2023.107537
• Barré N., Shivaraman R., Moser S., Salter PS., Schmidt M., Booth MJ., Jesacher A.:
  Direct laser-written aperiodic photonic volume elements for complex light shaping with high efficiency: inverse design and fabrication
  In: Advanced Photonics Nexus 2 (2023), S. 036006
  ISSN: 2791-1519
  DOI: 10.1117/1.APN.2.3.036006
• Bartels D., Albert ME., Nahr F., Schmidt M.:
  On the Influence of Volumetric Energy Density and Inter-Layer Time on the Material Properties of Case-Hardening Steels
  In: Alloys 2 (2023), S. 168-183
  ISSN: 2674-063X
  DOI: 10.3390/alloys2030013
• Bartels D., Fallqvist M., Heise M., Vetter J., Schmidt M., Krakhmalev P.:
  Development of a novel wear-resistant WC-reinforced coating based on the case-hardening steel Bainidur AM for the substitution of carburizing heat treatments
  In: Journal of Materials Research and Technology 26 (2023), S. 186-198
  ISSN: 2238-7854
  DOI: 10.1016/j.jmrt.2023.07.200
• Bartels D., Novotny T., Albert M., Mohr A., van Soest F., Hill H., Merklein C., Schmidt M.:
  Effect of Volumetric Energy Density and Part Height on the Material Properties of Low-Alloyed Steels Manufactured by Laser-Based Powder Bed Fusion of Metals
  In: Advanced Engineering Materials (2023)
  ISSN: 1438-1656
  DOI: 10.1002/adem.202300009
• Bartels D., Novotny T., Schmidt M.:
  Influence of Carbon Content on the Material Properties of Low-Alloyed Steel Bainidur AM
  In: Additive Manufacturing in Multidisciplinary Cooperation and Production, Cham: Springer, 2023, S. 115-124 (Springer Tracts in Additive Manufacturing)
  ISBN: 9783031376702
  DOI: 10.1007/978-3-031-37671-9_10
• Bartels D., von Lattre-Hertel A., Novotny T., Mohr A., Hill H., Merklein C., Schmidt M.:
  Directed Energy Deposition of Low-Alloyed Steels: An Insight on Microstructural and Mechanical Properties
  In: Steel Research International (2023), S. 2200925
  ISSN: 1611-3683
  DOI: 10.1002/srin.202200925
• Baumgärtner B., Rothfelder R., Greiner S., Breuning C., Renner J., Schmidt M., Drummer D., Körner C., Markl M., Hausotte T.:
  Evaluation of Additively-Manufactured Internal Geometrical Features Using X-ray-Computed Tomography
  In: Journal of Manufacturing and Materials Processing (2023)
  ISSN: 2504-4494
  DOI: 10.3390/jmmp7030095
• Baumgärtner B., Rothfelder R., Schmidt M., Hausotte T.:
  Detektion der Einflüsse von Konturparametern auf die Randschichtporosität in Ti-Al6-V4 in PBF-LB/M- Prozessen mittels Röntgen-Computertomographie
  Friedrich-Alexander-Universität Erlangen-Nürnberg Tag des Maschinenbaus (Lehrstuhl für Kunststofftechnik LKT Friedrich-Alexander-Universität Erlangen-Nürnberg, 1. Juli 2022 - 1. Juli 2023)
  DOI: 10.5281/zenodo.7766447
• Burger S., Schwarzkopf K., Klämpfl F., Schmidt M.:
  Shedding Light on Gas-Dynamic Effects in Laser Beam Fusion Cutting: The Potential of Background-Oriented Schlieren Imaging (BOS)
  In: Sensors 23 (2023), S. 729
  ISSN: 1424-8220
  DOI: 10.3390/s23020729
• Hafenecker J., Bartels D., Kuball CM., Kreß M., Rothfelder R., Schmidt M., Merklein M.:
  Hybrid process chains combining metal additive manufacturing and forming – A review
  In: CIRP Journal of Manufacturing Science and Technology (2023), S. 98-115
  ISSN: 1755-5817
  DOI: 10.1016/j.cirpj.2023.08.002
  URL: https://www.sciencedirect.com/science/article/pii/S1755581723001220
• Hafenecker J., Rothfelder R., Merklein M., Schmidt M.:
  Additive und umformtechnische Fertigung hybrider Bauteile mit lokal angepassten Eigenschaften
  Abschlusskolloquium des SFB 814 (Fürth, 13. Juni 2023 - 13. Juni 2023)
  DOI: 10.5281/zenodo.8081865
  URL: https://zenodo.org/record/8081865
• Hentschel O., Krakhmalev P., Fredriksson G., Olsèn J., Selte A., Schmidt M.:
  Influence of the in-situ heat treatment during manufacturing on the microstructure and properties of DED-LB/M manufactured maraging tool steel
  In: Journal of Materials Processing Technology 315 (2023), Art.Nr.: 117928
  ISSN: 0924-0136
  DOI: 10.1016/j.jmatprotec.2023.117928
• Kaufmann F., Forster C., Hummel M., Olowinsky A., Beckmann F., Moosmann J., Roth S., Schmidt M.:
  Characterization of Vapor Capillary Geometry in Laser Beam Welding of Copper with 515 nm and 1030 nm Laser Beam Sources by Means of In Situ Synchrotron X-ray Imaging
  In: Metals 13 (2023), S. 135
  ISSN: 2075-4701
  DOI: 10.3390/met13010135
• Kaufmann F., Schrauder J., Hummel M., Spurk C., Olowinsky A., Beckmann F., Moosmann J., Roth S., Schmidt M.:
  Towards an Understanding of the Challenges in Laser Beam Welding of Copper – Observation of the Laser-Matter Interaction Zone in Laser Beam Welding of Copper and Steel Using in Situ Synchrotron X-Ray Imaging
  In: Lasers in Manufacturing and Materials Processing (2023)
  ISSN: 2196-7229
  DOI: 10.1007/s40516-023-00225-6
• Kaufmann F., Strugulea M., Höltgen C., Roth S., Schmidt M.:
  Seam Properties of Overlap Welding Strategies from Copper to Aluminum Using Green Laser Radiation for Battery Tab Connections in Electric Vehicles
  In: Materials 16 (2023), S. 1069
  ISSN: 1996-1944
  DOI: 10.3390/ma16031069
• Kopp SP., Düsenberg B., Eshun PM., Schmidt J., Bück A., Roth S., Schmidt M.:
  Enabling triboelectric charging as a powder charging method for electrophotographic powder application in laser-based powder bed fusion of polymers by triboelectric charge control
  In: Additive Manufacturing (2023), S. 103531
  ISSN: 2214-7810
  DOI: 10.1016/j.addma.2023.103531
• Kopp SP., Medvedev V., Tangermann-Gerk K., Wöltinger N., Rothfelder R., Graßl F., Heinrich M., Januskaite P., Goyanes A., Basit AW., Roth S., Schmidt M.:
  Electrophotographic 3D printing of pharmaceutical films
  In: Additive Manufacturing (2023), Art.Nr.: 103707
  ISSN: 2214-7810
  DOI: 10.1016/j.addma.2023.103707
• Maier A., Rühr M., Stephan M., Frankl S., Roth S., Schmidt M.:
  Tailoring Material Properties of Duplex Stainless Steel by DED-LB/M and In-situ Alloying with Elemental Powders
  In: Journal of Laser Applications 35 (2023), Art.Nr.: L202
  ISSN: 1042-346X
  DOI: 10.2351/7.0001119
• Maier A., Rühr M., Stephan M., Roth S., Schmidt M.:
  Comparison of Material Properties of Duplex Stainless Steel 1.4462 Processed by DED-LB/M and PBF-LB/M
  In: Igor Drstvensek, Snehashis Pal, Nataša Ihan Hren (Hrsg.): Additive Manufacturing in Multidisciplinary Cooperation and Production, Cham: Springer, 2023, S. 105 - 114 (Springer Tracts in Additive Manufacturing (STAM))
  ISBN: 978-3-031-37671-9
  DOI: 10.1007/978-3-031-37671-9_9
  URL: https://link.springer.com/chapter/10.1007/978-3-031-37671-9_9
• Marschall M., Cholewa S., Kopp SP., Drummer D., Schmidt M.:
  Holistic Characterization of PBF-LB/P Powder Regarding Isothermal Crystallization, Rheology and Optical Properties Under Process Conditions
  In: Igor Drstvensek, Snehashis Pal, Nataša Ihan Hren (Hrsg.): Additive Manufacturing in Multidisciplinary Cooperation and Production, Cham: Springer, 2023, S. 43-52
  ISBN: 9783031376702
  DOI: 10.1007/978-3-031-37671-9_5
• März R., Hafenecker J., Bartels D., Schmidt M., Merklein M.:
  Numerical investigation on the deep drawing of sheet metals with an additively applied coating
  The 26th International ESAFORM Conference on Material Forming (Kraków, 19. April 2023 - 21. April 2023)
  In: Lukasz Madej, Mateusz Sitko, Konrad Perzynsk (Hrsg.): Material Forming 2023
  DOI: 10.21741/9781644902479-100
• Nahr F., Bartels D., Rothfelder R., Schmidt M.:
  Influence of Novel Beam Shapes on Laser-Based Processing of High-Strength Aluminium Alloys on the Basis of EN AW-5083 Single Weld Tracks
  In: Journal of Manufacturing and Materials Processing 7 (2023), S. 93
  ISSN: 2504-4494
  DOI: 10.3390/jmmp7030093
• Nahr F., Bartels D., Rothfelder R., Schmidt M.:
  Influence of Novel Beam Shapes on Laser-Based Processing of High-Strength Aluminium Alloys on the Basis of EN AW-5083 Single Weld Tracks
  In: Journal of Manufacturing and Materials Processing 7 (2023), S. 93
  ISSN: 2504-4494
  DOI: 10.3390/jmmp7030093
• Nahr F., Rasch M., Burkhardt C., Renner J., Baumgärtner B., Hausotte T., Körner C., Steinmann P., Mergheim J., Schmidt M., Markl M.:
  Geometrical Influence on Material Properties for Ti6Al4V Parts in Powder Bed Fusion
  In: Journal of Manufacturing and Materials Processing 7 (2023), S. 82
  ISSN: 2504-4494
  DOI: 10.3390/jmmp7030082
• Ni D., Späth M., Klämpfl F., Schmidt M., Hohmann M.:
  Random laser-assisted whispering gallery mode laser for precise determination of microstructures
  Frontiers in Optics + Laser Science 2023, FiO, LS 203: Part of Frontiers in Optics + Laser Science 2023 (Tacoma, WA, 9. Oktober 2023 - 12. Oktober 2023)
  In: Frontiers in Optics: Proceedings Frontiers in Optics + Laser Science 2023, FiO, LS 2023 2023
  DOI: 10.1364/FIO.2023.JM7A.82
• Ni D., Späth M., Klämpfl F., Schmidt M., Hohmann M.:
  Threshold behavior and tunability of a diffusive random laser
  In: Optics Express 31 (2023), S. 25747-52762
  ISSN: 1094-4087
  DOI: 10.1364/OE.491475
• Papke T., Hafenecker J., Römisch D., März R., Hentschel O., Bartels D., Schmidt M., Merklein M.:
  Alternating Additive Manufacturing and Forming - An Innovative Manufacturing Approach
  In: Journal of Manufacturing and Materials Processing 7 (2023), S. 1-21
  ISSN: 2504-4494
  DOI: 10.3390/jmmp7030090
• Risse JH., Trempa M., Huber F., Höppel HW., Bartels D., Schmidt M., Reimann C., Friedrich J.:
  Microstructure and Mechanical Properties of Hypereutectic Al-High Si Alloys up to 70 wt.% Si-Content Produced from Pre-Alloyed and Blended Powder via Laser Powder Bed Fusion
  In: Materials 16 (2023), S. 657
  ISSN: 1996-1944
  DOI: 10.3390/ma16020657
• Rothfelder R., Nahr F., Bartels D., Chechik L., Schmidt M.:
  A Brief History of the progress of Laser Powder Bed Fusion of Metals in Europe
  In: Journal of Manufacturing Science and Engineering (2023), S. 1-47
  ISSN: 1087-1357
  DOI: 10.1115/1.4062788
• Schwarzkopf K., Rothfelder R., Rasch M., Schmidt M.:
  Two-Color-Thermography for Temperature Determination in Laser Beam Welding of Low-Melting Materials
  In: Sensors 23 (2023), Art.Nr.: 4908
  ISSN: 1424-8220
  DOI: 10.3390/s23104908
• Schwarzkopf K., Rothfelder R., Rasch M., Schmidt M.:
  Two-Color-Thermography for Temperature Determination in Laser Beam Welding of Low-Melting Materials
  In: Sensors 23 (2023), S. 4908
  ISSN: 1424-8220
  DOI: 10.3390/s23104908
• Setter R., Hafenecker J., Rothfelder R., Kopp SP., Roth S., Schmidt M., Merklein M., Wudy K.:
  Innovative Process Strategies in Powder-Based Multi-Material Additive Manufacturing
  In: Journal of Manufacturing and Materials Processing 7 (2023), S. 133
  ISSN: 2504-4494
  DOI: 10.3390/jmmp7040133
• Späth M., Rohde M., Ni D., Knieling F., Stelzle F., Schmidt M., Klämpfl F., Hohmann M.:
  Author Correction: The influence of the optical properties on the determination of capillary diameters (Scientific Reports, (2022), 12, 1, (270), 10.1038/s41598-021-04359-5)
  In: Scientific Reports 13 (2023), Art.Nr.: 2723
  ISSN: 2045-2322
  DOI: 10.1038/s41598-022-26996-0
• Vetter J., Beneder S., Kandler M., Feyer F., Körner C., Schmidt M.:
  Impact of Particle Size Distribution in the Preform on Thermal Conductivity, Vickers Hardness and Tensile Strength of Copper-Infiltrated AISI H11 Tool Steel
  In: Materials 16 (2023), S. 2659
  ISSN: 1996-1944
  DOI: 10.3390/ma16072659
• Vorobev V., Weidmann D., Agdarov S., Beiderman Y., Shabairou N., Benyamin M., Klämpfl F., Schmidt M., Gorin D., Zalevsky Z.:
  Full-optical photoacoustic imaging using speckle analysis and resolution enhancement by orthogonal pump patterns projection
  In: Scientific Reports 13 (2023), Art.Nr.: 18081
  ISSN: 2045-2322
  DOI: 10.1038/s41598-023-45490-9
• Will T., Kohl J., Hoelbling C., Mueller L., Schmidt M.:
  Laser welding of different pure copper materials under consideration of shielding gas influence and impact on quality relevant surface topographical features
  In: Journal of Laser Applications 35 (2023)
  ISSN: 1042-346X
  DOI: 10.2351/7.0000891
• Will T., Müller J., Müller R., Hölbling C., Goth C., Schmidt M.:
  Prediction of electrical resistance of laser-welded copper pin-pairs with surface topographical information from inline post-process observation by optical coherence tomography
  In: International Journal of Advanced Manufacturing Technology (2023)
  ISSN: 0268-3768
  DOI: 10.1007/s00170-022-10796-x
• Winter J., Redka D., Minár J., Schmidt M., Huber HP.:
  Resolving transient temperature and density during ultrafast laser ablation of aluminum
  In: Applied Physics A: Materials Science and Processing 129 (2023), Art.Nr.: 665
  ISSN: 0947-8396
  DOI: 10.1007/s00339-023-06922-5
• Wittmann A., Bader T., Alidoust Chamandani S., Hentschel O., Schmidt M., Gold G.:
  Feasibility of Manufacturing Dielectric Image Lines by Using Laser-Based Directed Energy Deposition of Polymers
  In: IEEE Access (2023)
  ISSN: 2169-3536
  DOI: 10.1109/ACCESS.2023.3325197
  URL: https://ieeexplore.ieee.org/document/10286514/keywords#keywords
• Yang Z., Huber F., Krapf A., Merle B., Markl M., Schmidt M., Körner C.:
  Revealing bulk metallic glass crystallization kinetics during laser powder bed fusion by a combination of experimental and numerical methods
  In: Journal of Non-Crystalline Solids 619 (2023), Art.Nr.: 122532
  ISSN: 0022-3093
  DOI: 10.1016/j.jnoncrysol.2023.122532

2022

• Ackermann L., Roider C., Cvecek K., Schmidt M.:
  Methods for uniform beam shaping and their effect on material ablation
  In: Applied Physics A: Solids and Surfaces (2022)
  ISSN: 0721-7250
  DOI: 10.1007/s00339-022-06004-y
  URL: https://link.springer.com/article/10.1007/s00339-022-06004-y
• Bartels D., Novotny T., Hentschel O., Huber F., Mys R., Merklein C., Schmidt M.:
  In situ modification of case-hardening steel 16MnCr5 by C and WC addition by means of powder bed fusion with laser beam of metals (PBF-LB/M)
  In: International Journal of Advanced Manufacturing Technology (2022)
  ISSN: 0268-3768
  DOI: 10.1007/s00170-022-08848-3
• Bartels D., Novotny T., Mohr A., van Soest F., Hentschel O., Merklein C., Schmidt M.:
  PBF-LB/M of Low-Alloyed Steels: Bainite-like Microstructures despite High Cooling Rates
  In: Materials 15 (2022), S. 6171
  ISSN: 1996-1944
  DOI: 10.3390/ma15176171
• Bartels D., Rohdenburg J., Mohr A., Rothfelder R., Schmidt M.:
  Laser Metal Deposition of Carbide-reinforced low-alloyed steel Bainidur AM
  In: Procedia CIRP 111 (2022), S. 237-240
  ISSN: 2212-8271
  DOI: 10.1016/j.procir.2022.08.057
• Baumgärtner B., Rothfelder R., Schmidt M., Hausotte T.:
  Untersuchung der Einflüsse von Konturparametern auf die Bildung von Oberflächenporosität in Ti-Al6-V4-Bauteilen in PBF-LB/M-Prozessen mittels Röntgen-Computertomographie
  8. Industriekolloquium des Sonderforschungsbereichs 814 "Additive Fertigung" (Lehrstuhl für Kunststofftechnik LKT Friedrich-Alexander-Universität Erlangen-Nürnberg, 10. Mai 2022 - 10. Mai 2022)
  DOI: 10.5281/zenodo.7766051
• Boussinot G., Döring M., Schmidt M., Apel M.:
  Strongly out-of-equilibrium growth morphologies in fast solidifying eutectics
  In: Physical Review Materials 6 (2022), Art.Nr.: 043405
  ISSN: 2475-9953
  DOI: 10.1103/PhysRevMaterials.6.043405
• Burger S., Dilger P., Schwarzkopf K., Staudt T., Schmidt M.:
  Observation of the melt dynamics during laser remote fusion cutting
  In: Procedia CIRP 111 (2022), S. 592-596
  ISSN: 2212-8271
  DOI: 10.1016/j.procir.2022.08.157
• Campbell J., Rothfelder R., Wittmann A., Schmidt M., Volodkin D., Vikulina A.:
  Biopolymer-based microgels as the carriers for surface functionalization
  16th European Symposium on Controlled Drug Delivery (Egmond aan Zee, 12. April 2022 - 15. April 2022)
• Canziani H., Hanschmann B., Tischer F., Sommereyns A., Distler T., Schramm J., Hesse N., Schmidt J., Grünewald A., Detsch R., Boccaccini AR., Maskos M., Schmidt M., Vogel N.:
  Biodegradable Polylactide Supraparticle Powders with Functional Additives for Biomedical Additive Manufacturing
  In: Advanced Functional Materials (2022), S. 2205730
  ISSN: 1616-301X
  DOI: 10.1002/adfm.202205730
• Düsenberg B., Kopp SP., Tischer F., Schrüfer S., Roth S., Schmidt J., Schmidt M., Schubert DW., Peukert W., Bück A.:
  Enhancing Photoelectric Powder Deposition of Polymers by Charge Control Substances
  In: Polymers 14 (2022), S. 1332
  ISSN: 2073-4360
  DOI: 10.3390/polym14071332
• Eschner E., Staudt T., Schmidt M.:
  Sensing approach for the in-situ determination of spatter motion within PBF-LB/M
  In: CIRP Annals - Manufacturing Technology 71 (2022), S. 149-152
  ISSN: 0007-8506
  DOI: 10.1016/j.cirp.2022.03.005
  URL: https://www.sciencedirect.com/science/article/abs/pii/S0007850622000051?via=ihub
• Goebel CA., Brown E., Fahlbusch F., Wagner A., Buehler A., Raupach T., Hohmann M., Späth M., Burton N., Wölfle J., Schmidt M., Hartner A., Regensburger A., Knieling F.:
  High-resolution label-free mapping of murine kidney vasculature by raster-scanning optoacoustic mesoscopy: an ex vivo study
  In: Molecular and Cellular Pediatrics 9 (2022), Art.Nr.: 13
  ISSN: 2194-7791
  DOI: 10.1186/s40348-022-00144-0
• Hohmann M., Ganzleben I., Grünberg A., Menezes JG., Klämpfl F., Lengenfelder B., Liebing E., Heichler C., Neufert C., Becker C., Neurath M., Waldner M., Schmidt M.:
  In vivo multi spectral colonoscopy in mice
  In: Scientific Reports 12 (2022)
  ISSN: 2045-2322
  DOI: 10.1038/s41598-022-12794-1
• Hohmann M., Kühn D., Späth M., Rohde M., Stelzle F., Klämpfl F., Schmidt M.:
  Development and evaluation of a scoring system for assessing incisions in laser surgery
  In: Scientific Reports 12 (2022), S. 14741-
  ISSN: 2045-2322
  DOI: 10.1038/s41598-022-18969-0
• Kaufmann F., Maier A., Schrauder J., Schmidt M., Roth S.:
  Influence of superimposed intensity distributions on weld seam quality and spatter behavior during laser beam welding of copper with green laser radiation
  In: Journal of Laser Applications 34 (2022)
  ISSN: 1042-346X
  DOI: 10.2351/7.0000771
• Kohl S., Kaufmann F., Schmidt M.:
  Why Color Matters—Proposing a Quantitative Stability Criterion for Laser Beam Processing of Metals Based on Their Fundamental Optical Properties
  In: Metals 12 (2022), S. 1118
  ISSN: 2075-4701
  DOI: 10.3390/met12071118
• Kreß M., Bartels D., Schmidt M., Merklein M.:
  Material Characterization of Hybrid Components Manufactured by Laser-Based Directed Energy Deposition on Sheet Metal Substrates
  The 25th International Conference on Material Forming (ESAFORM 2022) (Braga, 27. April 2022 - 29. April 2022)
  DOI: 10.4028/p-3vlx01
• Kusoglu IM., Vieth P., Heiland S., Huber F., Lüddecke A., Ziefuss AR., Kwade A., Schmidt M., Schaper M., Barcikowski S., Grundmeier G.:
  Microstructure and corrosion properties of PBF-LB produced carbide nanoparticles additivated AlSi10Mg parts
  12th CIRP Conference on Photonic Technologies, LANE 2022 (Erlangen, 4. September 2022 - 8. September 2022)
  In: M. Schmidt, F. Vollertsen, B.M. Colosimo (Hrsg.): Procedia CIRP 2022
  DOI: 10.1016/j.procir.2022.08.046
• Luo N., Huber F., Ciftci N., Wahl L., Bezold A., Neumeier S., Uhlenwinkel V., Travitzky N., Schmidt M., Zenk C., Körner C.:
  Laser powder bed fusion of FeCoBSiNb-Cu bulk metallic glass composites: Processing, microstructure and mechanical properties
  In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 849 (2022), Art.Nr.: 143405
  ISSN: 0921-5093
  DOI: 10.1016/j.msea.2022.143405
• Maier A., Munk A., Kühl A., Rühr M., Hentschel O., Kaufmann F., Schrauder J., Roth S., Schmidt M.:
  Influence of process parameters on microstructural and mechanical properties of duplex stainless steel 2205 (1.4462) processed by DED-LB\M
  In: Procedia CIRP 111 (2022), S. 241-246
  ISSN: 2212-8271
  DOI: 10.1016/j.procir.2022.08.058
• Maiwald F., Roider C., Schmidt M., Hierl S.:
  Optical Coherence Tomography for 3D Weld Seam Localization in Absorber-Free Laser Transmission Welding
  In: Applied Sciences 12 (2022), S. 2718
  ISSN: 2076-3417
  DOI: 10.3390/app12052718
• Marschall M., Heintges C., Schmidt M.:
  Influence of flow aid additives on optical properties of polyamide for Laser-Based Powder Bed Fusion
  In: Procedia CIRP 111 (2022), S. 51-54
  ISSN: 2212-8271
  DOI: 10.1016/j.procir.2022.08.114
  URL: https://www.sciencedirect.com/science/article/pii/S2212827122009970
• Rasch M., Bartels D., Sun S., Schmidt M.:
  AlSi10Mg in Powder Bed Fusion with Laser Beam: An Old and Boring Material?
  In: Materials 15 (2022)
  ISSN: 1996-1944
  DOI: 10.3390/ma15165651
• Rothfelder R., Baumgärtner B., Hausotte T., Schmidt M.:
  Surface layer porosity and surface quality in dependency of contour scanning strategy of Ti6Al4V parts
  12th CIRP Conference on Photonic Technologies, LANE 2022 (Erlangen, 4. September 2022 - 8. September 2022)
  In: M. Schmidt, F. Vollertsen, B.M. Colosimo (Hrsg.): Procedia CIRP 2022
  DOI: 10.1016/j.procir.2022.08.112
• Rothfelder R., Huber F., Schmidt M.:
  Influence of beam shape on spatter formation during PBF-LB/M of Ti6Al4V and tungsten powder
  12th CIRP Conference on Photonic Technologies, LANE 2022 (Erlangen, DEU, 4. September 2022 - 8. September 2022)
  In: M. Schmidt, F. Vollertsen, B.M. Colosimo (Hrsg.): Procedia CIRP 2022
  DOI: 10.1016/j.procir.2022.08.105
• Schrauder J., Ermer J., Maier A., Frick T., Kaufmann F., Müller M., Schmidt M., Roth S.:
  Laser-based droplet brazing – Influence of additionally induced thermal energy on joint quality
  In: Procedia CIRP 111 (2022), S. 758-761
  ISSN: 2212-8271
  DOI: 10.1016/j.procir.2022.08.120
• Späth M., Rohde M., Ni D., Knieling F., Stelzle F., Schmidt M., Klämpfl F., Hohmann M.:
  The influence of the optical properties on the determination of capillary diameters
  In: Scientific Reports 12 (2022), Art.Nr.: 270
  ISSN: 2045-2322
  DOI: 10.1038/s41598-021-04359-5
• Vetter J., Huber F., Wachter S., Körner C., Schmidt M.:
  Development of a Material Extrusion Additive Manufacturing Process of 1.2083 steel comprising FFF Printing, Solvent and Thermal Debinding and Sintering
  21st CIRP Conference on Electro Physical and Chemical Machining, CIRP ISEM XXI 2022 (Zurich, 14. Juni 2022 - 16. Juni 2022)
  In: Procedia CIRP 2022
  DOI: 10.1016/j.procir.2022.09.140
• Will T., Eschner E., Schmidt M.:
  Features for image processing of OCT images for seam tracking applications in laser welding
  In: Journal of Laser Applications 34 (2022), Art.Nr.: 032002
  ISSN: 1042-346X
  DOI: 10.2351/7.0000673
• Will T., Garcia EM., Hoelbling C., Goth C., Schmidt M.:
  Algorithms for Weld Depth Measurement in Laser Welding of Copper with Scanning Optical Coherence Tomography
  In: Micromachines 13 (2022)
  ISSN: 2072-666X
  DOI: 10.3390/mi13122243
• Will T., Jeron T., Hoelbling C., Mueller L., Schmidt M.:
  In-Process Analysis of Melt Pool Fluctuations with Scanning Optical Coherence Tomography for Laser Welding of Copper for Quality Monitoring
  In: Micromachines 13 (2022)
  ISSN: 2072-666X
  DOI: 10.3390/mi13111937
• Will T., Kohl J., Burger S., Holbling C., Müller L., Schmidt M.:
  Weld Classification with Feature Extraction by FRESH Algorithm based on Surface Topographical Optical Coherence Tomography Data for Laser Welding of Copper
  In: IEEE Access (2022), S. 1-1
  ISSN: 2169-3536
  DOI: 10.1109/ACCESS.2022.3208877
• Will T., Schwarzkopf K., Hölbling C., Müller L., Schmidt M.:
  Feature extraction based on scalable hypothesis tests from photodiode data in laser welding processes
  12th CIRP Conference on Photonic Technologies, LANE 2022 (Erlangen, 4. September 2022 - 8. September 2022)
  In: M. Schmidt, F. Vollertsen, B.M. Colosimo (Hrsg.): Procedia CIRP 2022
  DOI: 10.1016/j.procir.2022.08.084
• Wittmann A., Hentschel O., Sommereyns A., Schmidt M.:
  Generation of Polyamide 12 Coatings on Stainless Steel Substrates by Directed Energy Deposition with a Thulium-Doped Fiber Laser (DED-LB/P)
  In: Polymers 14 (2022), S. 3729
  ISSN: 2073-4360
  DOI: 10.3390/polym14183729
• Wittmann A., Kroha L., Huber F., Schmidt M.:
  Laser-based coating process of PEEK powder on stainless steel substrates by using a thulium-doped fiber laser
  In: Procedia CIRP 113 (2022), S. 588-593
  ISSN: 2212-8271
  DOI: 10.1016/j.procir.2022.09.179
• Yang Z., Wang H., Krauß S., Huber F., Merle B., Schmidt M., Markl M., Körner C.:
  Evolution of an industrial-grade Zr-based bulk metallic glass during multiple laser beam melting
  In: Journal of Non-Crystalline Solids 589 (2022), Art.Nr.: 121649
  ISSN: 0022-3093
  DOI: 10.1016/j.jnoncrysol.2022.121649

2021

• Ackermann L., Roider C., Schmidt M.:
  Uniform and efficient beam shaping for high-energy lasers
  In: Optics Express 29 (2021), S. 17997-18009
  ISSN: 1094-4087
  DOI: 10.1364/OE.426953
• Barré N., Shivaraman R., Ackermann L., Moser S., Schmidt M., Salter P., Booth MJ., Jesacher A.:
  Tomographic refractive index profiling of direct laser written waveguides
  In: Optics Express 29 (2021), S. 35414-35425
  ISSN: 1094-4087
  DOI: 10.1364/OE.434846
  URL: https://www.osapublishing.org/oe/fulltext.cfm?uri=oe-29-22-35414&id=460543
• Bartels D., Hentschel O., Dauer J., Burgmayr W., Schmidt M.:
  Processing of low-alloyed case-hardening steel Bainidur AM by means of DED-LB/M
  Lasers in Manufacturing (LiM) 2021 (München, 21. Juni 2021 - 24. Juni 2021)
  URL: https://wlt.de/sites/default/files/2021-10/directed_energy_deposition/Contribution_224_final.pdf
• Bergler M., Cvecek K., Werr F., Veber A., Schreiner J., Eckstein U., Webber KG., Schmidt M., de Ligny D.:
  Coupling raman, brillouin and nd3+ photo luminescence spectroscopy to distinguish the effect of uniaxial stress from cooling rate on soda-lime silicate glass
  In: Materials 14 (2021), Art.Nr.: 3584
  ISSN: 1996-1944
  DOI: 10.3390/ma14133584
• Bisti F., Alexeev I., Lanzetta M., Schmidt M.:
  A simple laser beam characterization apparatus based on imaging
  In: Journal of Applied Research and Technology 19 (2021), S. 98-116
  ISSN: 1665-6423
  DOI: 10.22201/icat.24486736e.2021.19.2.1579
• Boussinot G., Döring M., Hemes S., Stryzhyboroda O., Apel M., Schmidt M.:
  Laser powder bed fusion of eutectic Al–Ni alloys: Experimental and phase-field studies
  In: Materials and Design 198 (2021), Art.Nr.: 109299
  ISSN: 0261-3069
  DOI: 10.1016/j.matdes.2020.109299
• Burger S., Dilger P., Eschner E., Schmidt M.:
  Quantification of Melt Dynamics from High-Speed Observations Within the Remote Fusion Cutting Regime by Means of Image Processing
  DOI: 10.1007/978-3-030-78424-9_37
• Canziani H., Bever F., Sommereyns A., Schmidt M., Vogel N.:
  Roughly Spherical: Tailored PMMA-SiO2 Composite Supraparticles with Optimized Powder Flowability for Additive Manufacturing
  In: ACS Applied Materials and Interfaces (2021)
  ISSN: 1944-8244
  DOI: 10.1021/acsami.1c02264
• Dilger P., Forster C., Klein E., Burger S., Eschner E., Schmidt M.:
  Determination of the beam position in laser deep penetration welding using coaxially acquired images of the keyhole front and machine learning
  Conference on Lasers in Manufacturing (LiM) (Online, 21. Juni 2021 - 24. Juni 2021)
  In: Proceedings of the Lasers in Manufacturing (LiM) 2021 2021
  URL: https://www.wlt.de/sites/default/files/2021-10/fundamentals_and_process_simulation/Contribution_265_final.pdf
• Doñate-Buendía C., Gu D., Schmidt M., Barcikowski S., Korsunsky AM., Gökce B.:
  On the selection and design of powder materials for laser additive manufacturing
  In: Materials and Design 204 (2021), Art.Nr.: 109653
  ISSN: 0261-3069
  DOI: 10.1016/j.matdes.2021.109653
• Ermer J., Maier A., Schmidt M., Kaufmann F., Roth S.:
  Influence of plume attenuation under high power laser welding of copper using visible wavelengths
  In: Journal of Laser Applications 33 (2021), Art.Nr.: 042006
  ISSN: 1042-346X
  DOI: 10.2351/7.0000505
• Grünewald M., Popp K., Rudloff J., Lang M., Sommereyns A., Schmidt M., Mohseni-Mofidi S., Bierwisch C.:
  Experimental, numerical and analytical investigation of the polyamide 12 powder bed fusion with the aim of building dimensionless characteristic numbers
  In: Materials & Design 201 (2021), S. 109470
  ISSN: 0264-1275
  DOI: 10.1016/j.matdes.2021.109470
• Hafenecker J., Kuball CM., Rothfelder R., Schmidt M., Merklein M.:
  Surface modification of additively manufactured parts by forming
  ESAFORM 2021 (Liège, 14. April 2021 - 16. April 2021)
  DOI: 10.25518/esaform21.2124
• Hafenecker J., Rothfelder R., Schmidt M., Merklein M.:
  Stretch Forming of Ti-6Al-4V Hybrid Parts at Elevated Temperatures
  19th International Conference on Sheet Metal (Shemet 2021) (Erlangen, 29. März 2021 - 31. März 2021)
  In: Merklein, M.; Duflou, J.; Fratini, L.; Hagenah, H.; Martins, P.; Meschut, G.; Micari, F. (Hrsg.): Sheet Metal 2021, Zürich: 2021
  DOI: 10.4028/www.scientific.net/KEM.883.135
• Hohmann M., Hecht D., Lengenfelder B., Späth M., Klämpfl F., Schmidt M.:
  Proof of principle for direct reconstruction of qualitative depth information from turbid media by a single hyper spectral image
  In: Sensors 21 (2021), Art.Nr.: 2860
  ISSN: 1424-8220
  DOI: 10.3390/s21082860
• Hohmann M., Karabayir A., Herzler P., Späth M., Klämpfl F., Schmidt M.:
  Analysis of diffuse reflectance spectroscopy by means of Bayesian inference and separation of the parameters for scattering strength and spectral dependence of the scattering
  In: Journal of Biophotonics (2021)
  ISSN: 1864-063X
  DOI: 10.1002/jbio.202100205
• Hohmann M., Lengenfelder B., Muhr D., Späth M., Hauptkorn M., Klämpfl F., Schmidt M.:
  Direct measurement of the scattering coefficient
  In: Biomedical Optics Express 12 (2021), S. 320-335
  ISSN: 2156-7085
  DOI: 10.1364/BOE.410248
• Hohmann M., Späth M., Ni D., Dörner D., Lengenfelder B., Klämpfl F., Schmidt M.:
  Random laser as a potential tool for the determination of the scattering coefficient
  In: Biomedical Optics Express 12 (2021), S. 5439
  ISSN: 2156-7085
  DOI: 10.1364/BOE.432052
• Horcher A., Tangermann-Gerk K., Krenkel W., Schmidt M., Bordia RK., Motz G.:
  Laser pyrolyzed organosilazane-based Al/ZrO2 composite coating on stainless steel: Resulting microstructure and mechanical properties
  In: International Journal of Applied Ceramic Technology (2021)
  ISSN: 1546-542X
  DOI: 10.1111/ijac.13917
• Huber F., Bartels D., Schmidt M.:
  In Situ Alloy Formation of a WMoTaNbV Refractory Metal High Entropy Alloy by Laser Powder Bed Fusion (PBF-LB/M)
  In: Materials 14 (2021), S. 3095
  ISSN: 1996-1944
  DOI: 10.3390/ma14113095
• Huber F., Papke T., Kauffmann C., Rothfelder R., Krakhmalev P., Merklein M., Schmidt M.:
  Systematic exploration of the L-PBF processing behavior and resulting properties of β-stabilized Ti-alloys prepared by in-situ alloy formation
  In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 818 (2021), Art.Nr.: 141374
  ISSN: 0921-5093
  DOI: 10.1016/j.msea.2021.141374
• Huber F., Rasch M., Schmidt M.:
  Laser Powder Bed Fusion (PBF-LB/M) Process Strategies for In-Situ Alloy Formation with High-Melting Elements
  In: Metals (2021)
  ISSN: 2075-4701
  DOI: 10.3390/met11020336
  URL: https://www.mdpi.com/2075-4701/11/2/336
• Koller TM., Cui J., Schmidt M., Knorr J., Fröba AP.:
  Surface light scattering in reflection geometry: Capabilities and limitations
  In: Applied Optics 60 (2021), S. 9042-9053
  ISSN: 1559-128X
  DOI: 10.1364/AO.440071
• Kusoglu IM., Huber F., Doñate-Buendía C., Ziefuß AR., Gökce B., Sehrt JT., Kwade A., Schmidt M., Barcikowski S.:
  Nanoparticle Additivation Effects on Laser Powder Bed Fusion of Metals and Polymers—A Theoretical Concept for an Inter-Laboratory Study Design All Along the Process Chain, Including Research Data Management
  In: Materials 14 (2021), S. 4892
  ISSN: 1996-1944
  DOI: 10.3390/ma14174892
• Lengenfelder B., Hohmann M., Späth M., Scherbaum D., Weiß M., Rupitsch S., Schmidt M., Zalevsky Z., Klämpfl F.:
  Remote Photoacoustic Sensing Using Single Speckle Analysis by an Ultra-Fast Four Quadrant Photo-Detector
  In: Sensors 21 (2021)
  ISSN: 1424-8220
  DOI: 10.3390/s21062109
• Levichev N., Staudt T., Schmidt M., Duflou JR.:
  Hyperspectral imaging and trim-cut visualization of laser cutting
  In: CIRP Annals - Manufacturing Technology 70 (2021), S. 207-210
  ISSN: 0007-8506
  DOI: 10.1016/j.cirp.2021.04.015
  URL: https://www.sciencedirect.com/science/article/abs/pii/S0007850621000391?via=ihub
• Mayer E., Stichel T., Roth S., Neermann S., Franke J., Schmidt M.:
  Generation of Printed Electronics on Thermal Sensitive Substrates by Laser Assisted Sintering of Nanoparticle Inks
  14th International Congress Molded Interconnect Devices, MID 2021 (, 8. Februar 2021 - 11. Februar 2021)
  In: 2021 14th International Congress: Molded Interconnect Devices, MID 2021 - Proceedings 2021
  DOI: 10.1109/MID50463.2021.9361625
• Orazi L., Romoli L., Schmidt M., Li L.:
  Ultrafast laser manufacturing: from physics to industrial applications
  In: CIRP Annals - Manufacturing Technology 70 (2021), S. 543-566
  ISSN: 0007-8506
  DOI: 10.1016/j.cirp.2021.05.007
• Papke T., Bartels D., Hofmann H., Mys R., Schmidt M., Merklein M.:
  Additive Fertigung eines hybriden Planetenträgers
  In: Zeitschrift für wirtschaftlichen Fabrikbetrieb 116 (2021), S. 478-482
  ISSN: 0932-0482
  DOI: 10.1515/zwf-2021-0124
• Rothfelder R., Lanzl L., Selzam JH., Drummer D., Schmidt M.:
  Vibrational Microfeeding of Polymer and Metal Powders for Locally Graded Properties in Powder-Based Additive Manufacturing
  In: Journal of Materials Engineering and Performance (2021)
  ISSN: 1059-9495
  DOI: 10.1007/s11665-021-06271-5
• Schmidt M., Dahotre NB., Bourell D., Toyserkani E.:
  Laser-based additive manufacturing: Processes and materials
  In: Optics and Laser Technology 139 (2021), Art.Nr.: 106999
  ISSN: 0030-3992
  DOI: 10.1016/j.optlastec.2021.106999
• Schuffenhauer T., Stichel T., Schmidt M.:
  Employment of an Extended Double-Integrating-Sphere System to Investigate Thermo-optical Material Properties for Powder Bed Fusion
  In: Journal of Materials Engineering and Performance (2021)
  ISSN: 1059-9495
  DOI: 10.1007/s11665-021-05586-7
• Schwarzkopf K., Eschner E., Schmidt M.:
  Arrangement for the benchmarking of in-situ process monitoring of topographical process signatures within the Laser Powder Bed Fusion process
  Conference on Lasers in Manufacturing (LiM) (Online, 21. Juni 2021 - 24. Juni 2021)
  In: Proceedings of the Lasers in Manufacturing (LiM) 2021
  URL: https://wlt.de/sites/default/files/2021-10/system_technology_process_control/Contribution_205.pdf
• Sommereyns A., Gann S., Schmidt J., Chehreh AB., Luddecke A., Walther F., Goekce B., Barcikowski S., Schmidt M.:
  Quality over quantity: How different dispersion qualities of minute amounts of nano-additives affect material properties in powder bed fusion of polyamide 12
  In: Materials 14 (2021), Art.Nr.: 5322
  ISSN: 1996-1944
  DOI: 10.3390/ma14185322
• Sommereyns A., Hupfeld T., Gann S., Wang T., Wu C., Zhuravlev E., Lüddecke A., Baumann S., Rudloff J., Lang M., Goekce B., Barcikowski S., Schmidt M.:
  Influence of sub-monolayer quantities of carbon nanoparticles on the melting and crystallization behavior of polyamide 12 powders for additive manufacturing
  In: Materials & Design 201 (2021), S. 109487
  ISSN: 0264-1275
  DOI: 10.1016/j.matdes.2021.109487
• Spellauge M., Winter J., Rapp S., McDonnell C., Sotier F., Schmidt M., Huber HP.:
  Influence of stress confinement, particle shielding and re-deposition on the ultrashort pulse laser ablation of metals revealed by ultrafast time-resolved experiments
  In: Applied Surface Science 545 (2021), Art.Nr.: 148930
  ISSN: 0169-4332
  DOI: 10.1016/j.apsusc.2021.148930
• Winter J., Spellauge M., Hermann J., Eulenkamp C., Huber HP., Schmidt M.:
  Ultrashort single-pulse laser ablation of stainless steel, aluminium, copper and its dependence on the pulse duration
  In: Optics Express 29 (2021), S. 14561-14581
  ISSN: 1094-4087
  DOI: 10.1364/OE.421097
• Wittmann A., Heberle J., Huber F., Schmidt M.:
  Consolidation of thermoplastic coatings by means of a thulium-doped fiber laser
  In: Journal of Laser Applications 33 (2021), Art.Nr.: 042032
  ISSN: 1042-346X
  DOI: 10.2351/7.0000501
• Wittmann A., Hentschel O., Ermer J., Sommereyns A., Huber F., Schmidt M.:
  Laser-based coating process of PA12 on stainless steel substrates
  Lasers in Manufacturing (LiM) 2021 (München, 21. Juni 2021 - 24. Juni 2021)

2020

• Ackermann S., Kolb T., Tremel J., Schmidt M.:
  Three levels of software applications for a digitalized additive manufacturing process chain
  11th CIRP Conference on Photonic Technologies [LANE 2020] (Online, 7. September 2020 - 10. September 2020)
  URL: https://www.lane-conference.org/app/download/12811871749/LANE2020_1389_Ackermann.pdf?t=1599142082
• Apel M., Boussinot G., Döring M., Schmidt M.:
  Eutectic solidification in Al-Ni for L-PBF conditions: A phase-field simulation study
  11th CIRP Conference on Photonic Technologies, LANE 2020 (Virtual, Online, 7. September 2020 - 10. September 2020)
  In: M. Schmidt, F. Vollertsen, E. Govekar (Hrsg.): Procedia CIRP 2020
  DOI: 10.1016/j.procir.2020.09.013
• Asraf S., Lengenfelder B., Schmidt M., Zalevsky Z.:
  Remote Speckle-Based Measurements of Backward Brillouin Acoustic Vibrations in Optical Fibers
  In: Applied Sciences (2020)
  ISSN: 2076-3417
  DOI: 10.3390
• Bartels D., Klaffki J., Pitz I., Merklein C., Kostrewa F., Schmidt M.:
  Investigation on the case-hardening behavior of additively manufactured 16MnCr5
  In: Metals 10 (2020), Art.Nr.: 536
  ISSN: 2075-4701
  DOI: 10.3390/met10040536
• Bawart M., May MA., Öttl T., Roider C., Bernet S., Schmidt M., Ritsch-Marte M., Jesacher A.:
  Diffractive tunable lens for remote focusing in high-NA optical systems
  In: Optics Express 28 (2020), S. 26336
  ISSN: 1094-4087
  DOI: 10.1364/OE.400784
• Bergler M., Cvecek K., Werr F., Brehl M., de Ligny D., Schmidt M.:
  Cooling rate calibration and mapping of ultra-short pulsed laser modifications in fused silica by Raman and Brillouin spectroscopy
  In: International Journal of Extreme Manufacturing 2 (2020)
  ISSN: 2631-8644
  DOI: 10.1088/2631-7990/ab9583
  URL: https://iopscience.iop.org/article/10.1088/2631-7990/ab9583
• Bergler M., Cvecek K., Werr F., Brehl M., de Ligny D., Schmidt M.:
  Erratum: Cooling rate calibration and mapping of ultra-short pulsed laser modifications in fused silica by Raman and Brillouin spectroscopy (International Journal of Extreme Manufacturing DOI: 10.1088/2631-7990/ab9583)
  In: International Journal of Extreme Manufacturing 3 (2020), Art.Nr.: 019501
  ISSN: 2631-8644
  DOI: 10.1088/2631-7990/abc46d
• Boehm S., Schmidt M., Stichel T., Kahlmeyer M., Kryukov I., Sommer N.:
  Single-step Laser Plastic Deposition (LPD) using a near-infrared Thulium fiber-laser
  In: Polymer Testing 81 (2020), Art.Nr.: 106185
  ISSN: 0142-9418
  DOI: 10.1016/j.polymertesting.2019.106185
• Bräuer P., Bahr L., Röhricht ML., Schmidt M., Will S.:
  Spatially-resolved crystallinity determination of polymer welding seams by Raman-microscopy
  11th CIRP Conference on Photonic Technologies (LANE 2020) (Online, 6. September 2020 - 10. September 2020)
  DOI: 10.1016/j.procir.2020.09.128
• Canziani H., Chiera S., Schuffenhauer T., Kopp SP., Metzger F., Bück A., Schmidt M., Vogel N.:
  Bottom-Up Design of Composite Supraparticles for Powder-Based Additive Manufacturing
  In: Small (2020), Art.Nr.: 2002076
  ISSN: 1613-6829
  DOI: 10.1002/smll.202002076
• Dilger P., Eschner E., Schmidt M.:
  Camera-based closed-loop control for beam positioning during deep penetration welding by means of keyhole front morphology
  11th CIRP Conference on Photonic Technologies [LANE 2020] (Online, 7. September 2020 - 10. September 2020)
  In: M. Schmidt, F. Vollertsen, E. Govekar (Hrsg.): Procedia CIRP 2020
  DOI: 10.1016/j.procir.2020.09.140
  URL: https://www.sciencedirect.com/science/article/pii/S2212827120313287
• Döring M., Boussinot G., Hagen JF., Apel M., Kohl S., Schmidt M.:
  Scaling melt pool geometry over a wide range of laser scanning speeds during laser-based Powder Bed Fusion
  11th CIRP Conference on Photonic Technologies, LANE 2020 (, 7. September 2020 - 10. September 2020)
  In: M. Schmidt, F. Vollertsen, E. Govekar (Hrsg.): Procedia CIRP 2020
  DOI: 10.1016/j.procir.2020.09.012
• Ermer J., Saffer J., Schaumberger K., Kaufmann F., Wittmann A., Roth S., Schmidt M.:
  Qualification of a system technology for selective laser-based quasi-simultaneous soldering with an integrated pyrometric process control
  In: Procedia CIRP 94 (2020), S. 622-626
  ISSN: 2212-8271
  DOI: 10.1016/j.procir.2020.09.093
• Eschner E., Schwarzkopf K., Staudt T., Schmidt M.:
  Correlation of Spatter Quantity and Speed to Process Conditions in Laser Powder Bed Fusion of Metals
  In: Production at the leading edge of technology, 2020
  DOI: 10.1007/978-3-662-62138-7_38
  URL: https://www.springerprofessional.de/de/correlation-of-spatter-quantity-and-speed-to-process-conditions-/18413822
• Eschner E., Staudt T., Schmidt M.:
  Correlation of Spatter Behavior and Process Zone Formation in Powder Bed Fusion of Metals
  In: CIRP Annals - Manufacturing Technology (2020)
  ISSN: 0007-8506
  DOI: 10.1016/j.cirp.2020.04.092
• Ganzleben I., Hohmann M., Grünberg A., Menezes JG., Liebing E., Günther C., Thonn V., Beß D., Becker C., Schmidt M., Neurath M., Waldner M., Vieth M.:
  Topical application of Chlorin e6-PVP (Ce6-PVP) for improved endoscopic detection of neoplastic lesions in a murine colitis-associated cancer model
  In: Scientific Reports 10 (2020), Art.Nr.: 13129
  ISSN: 2045-2322
  DOI: 10.1038/s41598-020-69570-2
• Gilmutdinov AK., Gorunov AI., Nyukhlaev OA., Schmidt M.:
  Investigations of the sound frequency effect on laser acoustic welding of stainless steel
  In: International Journal of Advanced Manufacturing Technology (2020)
  ISSN: 0268-3768
  DOI: 10.1007/s00170-019-04825-5
• Hafenecker J., Papke T., Huber F., Schmidt M., Merklein M.:
  Modelling of Hybrid Parts Made of Ti-6Al-4V Sheets and Additive Manufactured Structures
  Production at the leading edge of technology - Proceedings of the 10th Congress of the German Academic Association for Production Technology (WGP) (Dresden (digital), 23. September 2020 - 24. September 2020)
  In: Behrens, Bernd-Arno; Brosius, Alexander; Hintze, Wolfgang; Ihlenfeldt, Steffen; Wulfsberg, Jens Peter (Hrsg.): Proceedings of the 10th Congress of the German Academic Association for Production Technology (WGP), Berlin, Heidelberg: 2020
  DOI: 10.1007/978-3-662-62138-7_2
• Heinl M., Greiner S., Wudy K., Pobel C., Rasch M., Huber F., Papke T., Merklein M., Schmidt M., Körner C., Drummer D., Hausotte T.:
  Measuring procedures for surface evaluation of additively manufactured powder bed based polymer and metal parts
  In: Measurement Science and Technology 31 (2020), S. 1-14
  ISSN: 1361-6501
  DOI: 10.1088/1361-6501/ab89e2
• Henneberg J., Rothammer B., Zhao R., Vorndran M., Tenner J., Krachenfels K., Häfner T., Tremmel S., Schmidt M., Merklein M.:
  Lubricant free forming with tailored tribological conditions
  In: Dry Metal Forming Open Access Journal 6 (2020), S. 228-261
  Open Access: https://www.trockenumformen.de/app/download/10606371/DMFOAJ_6_2020_228-261_Henneberg.pdf
  URL: https://www.archiv.mfk.tf.fau.de?file=pubmfk_5eecb95410d59
• Hohmann M., Albrecht H., Lengenfelder B., Klämpfl F., Schmidt M.:
  Factors influencing the accuracy for tissue classification in multi spectral in-vivo endoscopy for the upper gastro-internal tract
  In: Scientific Reports 10 (2020), Art.Nr.: 3546
  ISSN: 2045-2322
  DOI: 10.1038/s41598-020-60389-5
• Hupfeld T., Doñate-Buendía C., Krause M., Sommereyns A., Wegner A., Sinnemann T., Schmidt M., Gökce B., Barcikowski S.:
  Scaling up colloidal surface additivation of polymer powders for laser powder bed fusion
  11th CIRP Conference on Photonic Technologies, LANE 2020 (, 7. September 2020 - 10. September 2020)
  In: M. Schmidt, F. Vollertsen, E. Govekar (Hrsg.): Procedia CIRP 2020
  DOI: 10.1016/j.procir.2020.09.022
• Hupfeld T., Salamon S., Landers J., Sommereyns A., Donate-Buendia C., Schmidt J., Wende H., Schmidt M., Barcikowski S., Goekce B.:
  3D printing of magnetic parts by laser powder bed fusion of iron oxide nanoparticle functionalized polyamide powders
  In: Journal of Materials Chemistry C 8 (2020), S. 12204-12217
  ISSN: 2050-7526
  DOI: 10.1039/d0tc02740e
• Hupfeld T., Sommereyns A., Riahi F., Donate-Buendia C., Gann S., Schmidt M., Goekce B., Barcikowski S.:
  Analysis of the Nanoparticle Dispersion and Its Effect on the Crystalline Microstructure in Carbon-Additivated PA12 Feedstock Material for Laser Powder Bed Fusion
  In: Materials 13 (2020)
  ISSN: 1996-1944
  DOI: 10.3390/ma13153312
• Hupfeld T., Sommereyns A., Schuffenhauer T., Zhuravlev E., Krebs M., Gann S., Keßler O., Schmidt M., Gökce B., Barcikowski S.:
  How colloidal surface additivation of polyamide 12 powders with well-dispersed silver nanoparticles influences the crystallization already at low 0.01 vol%
  In: Additive Manufacturing 36 (2020), Art.Nr.: 101419
  ISSN: 2214-7810
  DOI: 10.1016/j.addma.2020.101419
• Kopp SP., Stichel T., Roth S., Schmidt M.:
  Investigation of the electrophotographic powder deposition through a transfer grid for efficient additive manufacturing
  In: Procedia CIRP 94 (2020), S. 122-127
  ISSN: 2212-8271
  DOI: 10.1016/j.procir.2020.09.024
• Lengenfelder B., Hohmann M., Röhm M., Schmidt M., Zam A., Zalevsky Z., Klämpfl F.:
  Image reconstruction for remote photoacoustic tomography using speckle-analysis
  SPIE Photonics Europe (Online only, 6. April 2020 - 10. April 2020)
  In: SPIE (Hrsg.): Proceedings Volume 11363, Tissue Optics and Photonics; 113631F (2020) 2020
  DOI: 10.1117/12.2553080
• Lengenfelder B., Jarkas H., Shabairou N., Hohmann M., Schmidt M., Zalevsky Z., Klämpfl F.:
  Remote photoacoustic tomography using diode-array and speckle-analysis
  SPIE Photonics Europe (Online only, 6. April 2020 - 10. April 2020)
  In: SPIE (Hrsg.): Proceedings Volume 11363, Tissue Optics and Photonics; 1136308 (2020) 2020
  DOI: 10.1117/12.2542423
• Luo N., Scheitler CJ., Ciftci N., Galgon F., Fu Z., Uhlenwinkel V., Schmidt M., Körner C.:
  Preparation of Fe-Co-B-Si-Nb bulk metallic glasses by laser powder bed fusion: Microstructure and properties
  In: Materials Characterization 162 (2020), Art.Nr.: 110206
  ISSN: 1044-5803
  DOI: 10.1016/j.matchar.2020.110206
• Miyamoto I., Cvecek K., Schmidt M.:
  Advances of Laser Welding Technology of Glass -Science and Technology-
  In: Journal of Laser Micro Nanoengineering 15 (2020), S. 63-76
  ISSN: 1880-0688
  DOI: 10.2961/jlmn.2020.02.1001
• Neermann S., Steindl M., Franke J., Mayer E., Schmidt M.:
  Qualification of NIR, UV and Laser Irradiation as Alternative Photonic Sintering Methods for Printed Electronics
  2020 Pan Pacific Microelectronics Symposium, Pan Pacific 2020 (Kohala Coast, HI, 10. Februar 2020 - 13. Februar 2020)
  In: 2020 Pan Pacific Microelectronics Symposium 2020
  DOI: 10.23919/PanPacific48324.2020.9059353
• Papke T., Bartels D., Schmidt M., Merklein M., Gerhard D., Baumann J., Pitz I.:
  Additive Fertigung für industrielle Anwendungen - Entwicklung einer Auswahlsystematik für Bauteile zur Generierung funktionalen Mehrwerts mittels additiver Fertigung
  In: Industrie 4.0 Management : Gegenwart und Zukunft industrieller Geschäftsprozesse 2020 (2020), S. 50-54
  ISSN: 1434-1980
  DOI: 10.30844/I40M_20-4_S50-54
• Röhricht ML., Stichel T., Roth S., Bräuer P., Schmidt M., Will S.:
  Correlation between weld seam morphology and mechanical properties in laser transmission welding of polypropylene
  11th CIRP Conference on Photonic Technologies (LANE 2020) (Online, 6. September 2020 - 10. September 2020)
  DOI: 10.1016/j.procir.2020.09.119
• Saffer J., Dörres T., Schaumberger K., Ermer J., Kaufmann F., Wittmann A., Roth S., Schmidt M.:
  Laser beam welding of heat-resistant mixed joints using laser-based pre- and post-heating
  In: Procedia CIRP 94 (2020), S. 671-675
  ISSN: 2212-8271
  DOI: 10.1016/j.procir.2020.09.105
• Schmidt M., Will T.:
  The emerging role of imaging in laser materials processing
  In: Procedia CIRP 2020
  DOI: 10.1016/j.procir.2020.11.001
  URL: https://www.sciencedirect.com/science/article/pii/S2212827120315304
• Schoeppner V., Wuebbeke A., Schmidt M., Geissler B., Niendorf T.:
  Gut geschweißt - schlecht geschweißt: Ausgewählte Aspekte zur Bewertung des Laserdurchstrahlschweißens.
  In: Joining Plastics - Fügen von Kunststoffen (2020), S. 48-53
  ISSN: 1864-3450
• Schuffenhauer T., Stichel T., Schmidt M.:
  Experimental determination of scattering processes in the interaction of laser radiation with polyamide 12 powder
  11th CIRP Conference on Photonic Technologies, LANE 2020 (, 7. September 2020 - 10. September 2020)
  In: M. Schmidt, F. Vollertsen, E. Govekar (Hrsg.): Procedia CIRP 2020
  DOI: 10.1016/j.procir.2020.09.017
• Shabairou N., Lengenfelder B., Hohmann M., Klämpfl F., Schmidt M., Zalevsky Z.:
  All-optical, an ultra-thin endoscopic photoacoustic sensor using multi-mode fiber
  In: Scientific Reports (2020), Art.Nr.: 9142
  ISSN: 2045-2322
  DOI: 10.1038/s41598-020-66076-9
• Sommereyns A., Hupfeld T., Gökce B., Barcikowski S., Schmidt M.:
  Evaluation of essential powder properties through complementary particle size analysis methods for laser powder bed fusion of polymers
  11th CIRP Conference on Photonic Technologies, LANE 2020 (Virtual, Online, 7. September 2020 - 10. September 2020)
  In: M. Schmidt, F. Vollertsen, E. Govekar (Hrsg.): Procedia CIRP 2020
  DOI: 10.1016/j.procir.2020.09.023
• Späth M., Epp H., Schmidt M., Klämpfl F.:
  Calibration routine for incoherent optical fiber bundles for medical ultra-high spatial resolution fiber spectroscopy
  SPIE Photonics Europe 2020 (Online Only, 6. April 2020 - 10. April 2020)
  In: Proceedings Volume 11359, Biomedical Spectroscopy, Microscopy, and Imaging, 113591F 2020
  DOI: 10.1117/12.2543563
• Stübinger SB., Klämpfl F., Schmidt M., Zeilhofer HF. (Hrsg.):
  Lasers in Oral and Maxillofacial Surgery
  2020
  ISBN: 978-3-030-29603-2
  DOI: 10.1007/978-3-030-29604-9
• Winter J., Rapp S., Spellauge M., Eulenkamp C., Schmidt M., Huber HP.:
  Ultrafast pump-probe ellipsometry and microscopy reveal the surface dynamics of femtosecond laser ablation of aluminium and stainless steel
  In: Applied Surface Science 511 (2020), Art.Nr.: 145514
  ISSN: 0169-4332
  DOI: 10.1016/j.apsusc.2020.145514
• Winter J., Spellauge M., Gies P., Hermann J., Schmidt M., Huber HP.:
  Influence of pulse duration and separation on ultrafast single pulse laser ablation in industrial bulk metals: Complete time-resolved surface dynamics and its implications to laser material processing
  SPIE LASE, 2020 (San Francisco, CA, 1. Februar 2020 - 6. Februar 2020)
  In: Proc. SPIE 11267, Laser Applications in Microelectronic and Optoelectronic Manufacturing (LAMOM) XXV 2020
  DOI: 10.1117/12.2550674
• Wuebbeke A., Schoeppner V., Geissler B., Schmidt M., Magnier A., Wu T., Niendorf T., Jakob F., Heim HP.:
  Investigation of residual stresses in polypropylene using hot plate welding
  In: Welding in the World 64 (2020), S. 1671-1680
  ISSN: 0043-2288
  DOI: 10.1007/s40194-020-00939-7

2019

• Cao J., Brinksmeier E., Fu M., Gao RX., Liang B., Merklein M., Schmidt M., Yanagimoto J.:
  Manufacturing of advanced smart tooling for metal forming
  In: CIRP Annals - Manufacturing Technology (2019)
  ISSN: 0007-8506
  DOI: 10.1016/j.cirp.2019.05.001
• Cvecek K., Dehmel S., Miyamoto I., Schmidt M.:
  A review on glass welding by ultra-short laser pulses
  In: International Journal of Extreme Manufacturing 1 (2019), S. 042001
  ISSN: 2631-8644
  DOI: 10.1088/2631-7990/ab55f6
• Cvecek K., Heberle J., Bergler M., Miyamoto I., de Ligny D., Schmidt M.:
  Glass machining and in-situ metrology: Recovery of spatio-temporal phase distribution from 2-dimensional interference fringe movement caused by irradiation of glass with ultra-short laser pulses at high pulse repetition rates
  CLEO: Applications and Technology, CLEO_AT 2019 (San Jose, CA, 5. Mai 2019 - 10. Mai 2019)
  In: Optics InfoBase Conference Papers 2019
  DOI: 10.1364/CLEO_AT.2019.ATu3I.1
• Dilipkumar A., Al-Shemmary A., Kreiß L., Cvecek K., Carlé BE., Knieling F., Menezes JG., Thoma OM., Schmidt M., Neurath M., Waldner M., Friedrich O., Schürmann S.:
  Label-Free Multiphoton Endomicroscopy for Minimally Invasive In Vivo Imaging
  In: Advanced Science 6 (2019), Art.Nr.: 1801735
  ISSN: 2198-3844
  DOI: 10.1002/advs.201801735
• Eschner E., Staudt T., Schmidt M.:
  3D particle tracking velocimetry for the determination of temporally resolved particle trajectories within laser powder bed fusion of metals
  In: International Journal of Extreme Manufacturing 1 (2019), Art.Nr.: 3
  ISSN: 2631-8644
  DOI: 10.1088/2631-7990/ab3de9
  URL: https://iopscience.iop.org/article/10.1088/2631-7990/ab3de9
• Eschner E., Staudt T., Schmidt M.:
  Derivation of Three-dimensional Information of Particles in Laser Materials Processing by Means of Stereoscopic High-speed Imaging
  International Conference on Advanced Optical Technologies (University of Erlangen-Nürnberg, 13. März 2019 - 15. März 2019)
• Henneberg J., Rothammer B., Zhao R., Vorndran M., Tenner J., Krachenfels K., Häfner T., Tremmel S., Schmidt M., Merklein M.:
  Analysis of tribological behavior of surface modifications for a dry deep drawing process
  In: Dry Metal Forming Open Access Journal 5 (2019), S. 13-24
  Open Access: https://www.trockenumformen.de/publikationen/dmfoaj-2019/
  URL: https://www.archiv.mfk.tf.fau.de?file=pubmfk_5de11a374a235
• Heuberger E., Schmid D., Weberpals JP., Tenner F., Schmidt M.:
  Influence of the brazing speed on the seam characteristics in laser beam brazing of zinc coated steel
  In: Journal of Laser Applications 31 (2019), Art.Nr.: 022407
  ISSN: 1042-346X
  DOI: 10.2351/1.5096116
• Hohmann M., Albrecht H., Mudter J., Nagulin KY., Klämpfl F., Schmidt M.:
  Spectral Spatial Variation
  In: Scientific Reports 9 (2019), Art.Nr.: 7512
  ISSN: 2045-2322
  DOI: 10.1038/s41598-019-43971-4
• Hohmann M., Dörner D., Mehari F., Chen C., Späth M., Müller S., Albrecht H., Klämpfl F., Schmidt M.:
  Investigation of random lasing as a feedback mechanism for tissue differentiation during laser surgery
  In: Biomedical Optics Express 10 (2019), S. 807-816
  ISSN: 2156-7085
  DOI: 10.1364/BOE.10.000807
• Hohmann M., Hecht D., Lengenfelder B., Klämpfl F., Schmidt M.:
  Direct reconstruction of qualitative depth information from turbid media by a single hyper spectral image
  Photonics West 2019: BIOS (San Francisco, 2. Februar 2019 - 7. Februar 2019)
  In: Proc. SPIE 10885, Optical Diagnostics and Sensing XIX: Toward Point-of-Care Diagnostics 2019
  DOI: 10.1117/12.2509314
• Horcher A., Barroso G., Schmidt M., Motz G., Tangermann-Gerk K.:
  Laser and furnace pyrolyzed organosilazane-based glass/ZrO2 composite coating system - A comparison
  In: Journal of the European Ceramic Society (2019)
  ISSN: 0955-2219
  DOI: 10.1016/j.jeurceramsoc.2019.10.040
• Huber F., Mann V., Kaufmann F., Schmidt M.:
  Laser beam welding of Ti-6Al-4V hybrid-parts from additively manufactured elements and sheet metal
  Lasers in Manufacturing (LiM) 2019 (München, 24. Januar 2019 - 27. Januar 2019)
• Huber F., Papke T., Kerkien M., Tost F., Geyer G., Merklein M., Schmidt M.:
  Customized exposure strategies for manufacturing hybrid parts by combining laser beam melting and sheet metal forming
  In: Journal of Laser Applications (2019)
  ISSN: 1042-346X
  DOI: 10.2351/1.5096115
• Kopp SP., Stichel T., Schuffenhauer T., Roth S., Schmidt M.:
  Herausforderungen der additiven Fertigung von Multi-Material-Bauteilen
  7. Industriekolloquium des Sonderforschungsbereichs 814 - Additive Fertigung (Nürnberg, 12. Dezember 2019 - 12. Dezember 2019)
  In: Prof. Dr.-Ing. Dietmar Drummer (Hrsg.): Additive Fertigung: Vom Pulver zum multifunktionalen Bauteil 2019
• Kreiß L., Hohmann M., Klämpfl F., Schürmann S., Dehghani F., Schmidt M., Friedrich O., Büchler L.:
  Diffuse reflectance spectroscopy and Raman spectroscopy for label-free molecular characterization and automated detection of human cartilage and subchondral bone
  In: Sensors and Actuators B-Chemical 301 (2019), Art.Nr.: 127121
  ISSN: 0925-4005
  DOI: 10.1016/j.snb.2019.127121
• Lengenfelder B., Funk S., Hohmann M., Späth M., Klämpfl F., Stelzle F., Zalevsky Z., Schmidt M.:
  Remote speckle-sensing for improved differentiation between different types of tissues
  European Conferences on Biomedical Optics, 2019 (Munich, Germany, 23. Juni 2019 - 27. Juni 2019)
  In: SPIE (Hrsg.): Opto-Acoustic Methods and Applications in Biophotonics IV; 110771Q (2019) 2019
  DOI: 10.1117/12.2526589
• Lengenfelder B., Hohmann M., Klämpfl F., Waldner M., Zalevsky Z., Schmidt M.:
  Ex-vivo, remote photoacoustic sensing using speckle-analysis
  International Conference on Advanced Optical Technologies (Erlangen, 13. März 2019 - 15. März 2019)
  DOI: 10.1038/s41598-018-38446-x
  URL: https://www.saot.fau.de/events_saot/archive/international-conference/scientific-program/#collapse_3
• Lengenfelder B., Hohmann M., Klämpfl F., Zam A., Weiß M., Rupitsch S., Zalevsky Z., Schmidt M.:
  Model for the description of remote photoacoustic sensing using speckle-analysis
  European Conferences on Biomedical Optics (Munich, 23. Juni 2019 - 27. Juni 2019)
  In: SPIE (Hrsg.): Opto-Acoustic Methods and Applications in Biophotonics IV; 110771I (2019) 2019
  DOI: 10.1117/12.2526593
• Lengenfelder B., Mehari F., Hohmann M., Heinlein M., Chelales E., Waldner M., Klämpfl F., Zalevsky Z., Schmidt M.:
  Remote photoacoustic sensing using speckle-analysis
  In: Scientific Reports (2019)
  ISSN: 2045-2322
  DOI: 10.1038/s41598-018-38446-x
  URL: https://www.nature.com/articles/s41598-018-38446-x
• Lengenfelder B., Mehari F., Hohmann M., Löhr C., Waldner M., Schmidt M., Zalevsky Z., Klämpfl F.:
  Contact-free endoscopic photoacoustic sensing using speckle-analysis
  In: Journal of Biophotonics (2019)
  ISSN: 1864-063X
  DOI: 10.1002/jbio.201900130
• Lengenfelder B., Schwarzkopf K., Oetter N., Mehari F., Eschner E., Klämpfl F., Stelzle F., Kesting MR., Zalevsky Z., Schmidt M.:
  Acoustic differentiation of dental soft and hard tissues using remote speckle-analysis during Er:YAG ablation
  European Conferences on Biomedical Optics (Munich, 23. Juni 2019 - 27. Juni 2019)
  In: SPIE (Hrsg.): Opto-Acoustic Methods and Applications in Biophotonics IV; 110771L (2019) 2019
  DOI: 10.1117/12.2526578
• Mcdonnell C., Winter J., Rapp S., Huber HP., Schmidt M.:
  Early Stage Material Motion and Transient Optical Properties of Metals after Ultrashort Laser Pulse Irradiation
  In: Journal of Laser Micro Nanoengineering 14 (2019), S. 8-12
  ISSN: 1880-0688
  DOI: 10.2961/jlmn.2019.01.0002
• Mehari F., Lengenfelder B., Späth M., Klämpfl F., Waldner M., Schmidt M.:
  Laser-Induced Breakdown Spectroscopy (LIBS): An immerging modality for revealing elemental distribution in tissues
  International Conference on Advanced Optical Technologies (Erlangen, 13. März 2019 - 15. März 2019)
• Papke T., Huber F., Geyer G., Schmidt M., Merklein M.:
  Characterisation of the Tensile Bonding Strength of Ti-6Al-4V Hybrid Parts Made by Sheet Metal Forming and Laser Beam Melting
  8th Congress of the German Academic Association for Production Technology (WGP) (Aachen, 19. November 2018 - 20. November 2018)
  DOI: 10.1007/978-3-030-03451-1_36
  URL: https://www.springer.com/us/book/9783030034504
• Papke T., Huber F., Hafenecker J., Schmidt M., Merklein M.:
  Hybride Bauteile, Werkzeuge und Prozessketten – Anwendungen der Kombination aus Additiver Fertigung und Umformtechnik
  7. Industriekolloquium des Sonderforschungsbereichs 814 - Additive Fertigung (Nürnberg)
• Rasch M., Heberle J., Dechet M., Bartels D., Gotterbarm M., Klein L., Gorunov A., Schmidt J., Körner C., Peukert W., Schmidt M.:
  Grain Structure Evolution of Al–Cu Alloys in Powder Bed Fusion with Laser Beam for Excellent Mechanical Properties
  In: Materials 13 (2019)
  ISSN: 1996-1944
  DOI: 10.3390/ma13010082
• Rasch M., Roider C., Kohl S., Strauß J., Maurer N., Nagulin KY., Schmidt M.:
  Shaped laser beam profiles for heat conduction welding of aluminium-copper alloys
  In: Optics and Lasers in Engineering 115 (2019), S. 179-189
  ISSN: 0143-8166
  DOI: 10.1016/j.optlaseng.2018.11.025
  URL: https://authors.elsevier.com/a/1YA5XWipgSdRX
• Schaumberger K., Beck M., Saffer J., Kaufmann F., Ermer J., Roth S., Schmidt M.:
  Improving process reliability by means of detection of weld seam irregularities in copper via thermographic process monitoring
  17th Nordic Laser Materials Processing Conference, NOLAMP 2019 (Trondheim, 27. August 2019 - 29. August 2019)
  In: Odd M. Akselsen, Ivan Bunaziv (Hrsg.): Procedia Manufacturing 2019
  DOI: 10.1016/j.promfg.2019.08.009
• Schriefer T., Rauh H., Hofmann M., Schreibmüller N., Nusser T., Horwath C., Moritz W., Moosmann N., Deibert A., Gerberich T., Schaumberger K., Kaufmann F., Schmidt M.:
  High current contacts for integrated electric drives Serienfähige Hochstromkontakte für integrierte elektrische Fahrzeugantriebe
  In: wt Werkstattstechnik - Online 109 (2019), S. 335-341
  ISSN: 1436-4980
• Schuffenhauer T., Stichel T., Kopp SP., Roth S., Schmidt M.:
  Process route adaption to generate multi-layered compounds using vibration-controlled powder nozzles in selective laser melting of polymers
  Lasers in Manufacturing Conference 2019 (Munich, 24. Juni 2019 - 27. Juni 2019)
• Späth M., Klämpfl F., Stelzle F., Hohmann M., Lengenfelder B., Schmidt M.:
  A quantitative evaluation of the use of medical lasers in German hospitals
  In: Journal of Biophotonics (2019)
  ISSN: 1864-063X
  DOI: 10.1002/jbio.201900238
• Staudt T., Eschner E., Schmidt M.:
  Employing Hyperspectral Imaging for Temperature Determination in Laser Materials Processing
  International Conference on Advanced Optical Technologies (University of Erlangen-Nürnberg, 13. März 2019 - 15. März 2019)
  URL: https://www.saot.fau.de/files/2019/02/StaudtTobias.pdf
• Staudt T., Eschner E., Schmidt M.:
  Temperature determination in laser welding based upon a hyperspectral imaging technique
  In: CIRP Annals - Manufacturing Technology 68 (2019), S. 225-228
  ISSN: 0007-8506
  DOI: 10.1016/j.cirp.2019.04.117
  URL: https://www.sciencedirect.com/science/article/abs/pii/S0007850619301490?via=ihub
• Vorndran M., Häfner T., Rothammer B., Krachenfels K., Merklein M., Tremmel S., Schmidt M.:
  Laser based techniques to adapt the tribological conditions in dry deep drawing
  International Conference on Advanced Optical Technologies (Erlangen, 13. März 2019 - 15. März 2019)
  URL: https://www.archiv.mfk.tf.fau.de?file=pubmfk_5db142cda21ed

2018

• Beer O., Merklein C., Gerhard D., Hentschel O., Rasch M., Schmidt M.:
  Processing of the Heat Resistant Bearing Steel M50NiL by Selective Laser Melting - Verarbeitung des warmfesten Lagerstahls M50NiL mittels selektiven Laserstrahlschmelzens aus dem Pulverbett
  In: Journal of Heat Treatment and Materials 73 (2018), S. 187–201
  ISSN: 1867-2493
  DOI: 10.3139/105.110358
  URL: https://www.hanser-elibrary.com/doi/pdf/10.3139/105.110358
• Cvecek K., Miyamoto I., Heberle J., Bergler M., de Ligny D., Schmidt M.:
  Analysis of shockwave formation in glass welding by ultra-short pulses
  10th CIRP Conference on Photonic Technologies, LANE 2018 (Furth, 3. September 2018 - 6. September 2018)
  In: Michael Schmidt (Hrsg.): Procedia CIRP 2018
  DOI: 10.1016/j.procir.2018.08.128
• Geissler B., Laumer T., Wuebbeke A., Frick T., Schoeppner V., Schmidt M.:
  Analysis of the weld seam morphology of polypropylene in laser transmission welding
  In: Journal of Manufacturing Science and Engineering 140 (2018), Art.Nr.: 111017
  ISSN: 1087-1357
  DOI: 10.1115/1.4040876
• Geissler B., Laumer T., Wuebbeke A., Lakemeyer P., Frick T., Schoeppner V., Schmidt M.:
  Analysis of the interaction between the temperature field and the weld seam morphology in laser transmission welding by using two different discrete laser wavelengths
  In: Journal of Laser Applications 30 (2018), Art.Nr.: 032408
  ISSN: 1042-346X
  DOI: 10.2351/1.5040617
• Hagen JF., Rasch M., Kohl S., Schmidt M.:
  Geometry dependent microstructures: bug or feature?
  10th CIRP Conference on Photonic Technologies, LANE 2018 (Furth, 3. September 2018 - 6. September 2018)
  In: Michael Schmidt (Hrsg.): Procedia CIRP 2018
  DOI: 10.1016/j.procir.2018.08.024
• Heberle J., Häfner T., Schmidt M.:
  Efficient and damage-free ultrashort pulsed laser cutting of polymer intraocular lens implants
  In: CIRP Annals - Manufacturing Technology 67 (2018), S. 197-200
  ISSN: 0007-8506
  DOI: 10.1016/j.cirp.2018.04.095
• Hentschel O., Siegel L., Scheitler CJ., Huber F., Junker D., Gorunow A., Schmidt M.:
  Processing of AISI H11 Tool Steel Powder Modified with Carbon Black Nanoparticles for the Additive Manufacturing of Forging Tools with Tailored Mechanical Properties by Means of Laser Metal Deposition (LMD)
  In: Metals (2018)
  ISSN: 2075-4701
  DOI: 10.3390/met8090659
• Huber F., Bischof C., Hentschel O., Heberle J., Zettl J., Nagulin KY., Schmidt M.:
  Laser Beam Melting and heat-treatment of 1.2343 (AISI H11) tool steel - microstructure and mechanical properties
  In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 742 (2018), S. 109-115
  ISSN: 0921-5093
  DOI: 10.1016/j.msea.2018.11.001
• Huber F., Papke T., Kerkien M., Tost F., Geyer G., Merklein M., Schmidt M.:
  Customized Exposure Strategies for Manufacturing Hybrid Parts by Combining Laser Beam Melting and Sheet Metal Forming
  DOI: 10.2351/1.5096115
• Huber F., Papke T., Scheitler CJ., Hanrieder L., Merklein M., Schmidt M.:
  In Situ Formation of a Metastable β-Ti Alloy by Laser Powder Bed Fusion (L-PBF) of Vanadium and Iron Modified Ti-6Al-4V
  In: Metals 8 (2018), Art.Nr.: 1067
  ISSN: 2075-4701
  DOI: 10.3390/met8121067
  URL: https://www.mdpi.com/2075-4701/8/12/1067
• Hupfeld T., Laumer T., Stichel T., Schuffenhauer T., Heberle J., Schmidt M., Barcikowski S., Goekce B.:
  A new approach to coat PA12 powders with laser-generated nanoparticles for selective laser sintering
  10th CIRP Conference on Photonic Technologies, LANE 2018 (Furth, 3. September 2018 - 6. September 2018)
  In: Michael Schmidt (Hrsg.): Procedia CIRP 2018
  DOI: 10.1016/j.procir.2018.08.103
• Häfner T., Rothammer B., Tenner J., Krachenfels K., Merklein M., Tremmel S., Schmidt M., Schmidt M.:
  Adaption of tribological behavior of a-C:H coatings for application in dry deep drawing
  In: MATEC Web of Conferences 190 (2018), S. 1 - 10
  ISSN: 2261-236X
  DOI: 10.1051/matecconf/201819014002
  URL: https://www.archiv.mfk.tf.fau.de?file=pubmfk_5bb2fd875f1a8
• Häfner T., Strauß J., Roider C., Heberle J., Schmidt M.:
  Tailored laser beam shaping for efficient and accurate microstructuring
  In: Applied Physics A: Materials Science and Processing 124 (2018)
  ISSN: 1432-0630
  DOI: 10.1007/s00339-017-1530-0
  URL: https://link.springer.com/article/10.1007/s00339-017-1530-0
• Junker D., Hentschel O., Schmidt M., Merklein M.:
  Investigation of heat treatment strategies for additively-manufactured tools of X37CrMoV5-1
  In: Metals 8 (2018), Art.Nr.: 854
  ISSN: 2075-4701
  DOI: 10.3390/met8100854
• Karg M., Munk A., Ahuja B., Backer MV., Schmitt JP., Stengel C., Kuryntsev SV., Schmidt M.:
  Expanding particle size distribution and morphology of aluminium-silicon powders for Laser Beam Melting by dry coating with silica nanoparticles
  In: Journal of Materials Processing Technology 264 (2018), S. 155-171
  ISSN: 0924-0136
  DOI: 10.1016/j.jmatprotec.2018.08.045
• Karg M., Rasch M., Schmidt K., Spitzer S., Karsten TF., Schlaug D., Biaciu CR., Gorunov A., Schmidt M.:
  Laser Alloying Advantages by Dry Coating Metallic Powder Mixtures with SiOx Nanoparticles
  In: Nanomaterials 8 (2018), S. 1-29
  ISSN: 2079-4991
  DOI: 10.3390/nano8100862
  URL: https://www.mdpi.com/2079-4991/8/10/862
• Kolb T., Gebhardt P., Schmidt O., Tremel J., Schmidt M.:
  Melt pool monitoring for laser beam melting of metals: assistance for material qualification for the stainless steel 1.4057
  10th CIRP Conference on Photonic Technologies (LANE 2018) (Fürth)
  In: 74 2018
  DOI: 10.1016/j.procir.2018.08.058
  URL: https://www.sciencedirect.com/science/article/pii/S2212827118308424
• Kolb T., Mahr A., Huber F., Tremel J., Schmidt M.:
  Qualification of channels produced by laser powder bed fusion: Analysis of cleaning methods, flow rate and melt pool monitoring data
  In: Additive Manufacturing (2018)
  ISSN: 2214-7810
  DOI: 10.1016/j.addma.2018.11.026
• Kolb T., Müller L., Tremel J., Schmidt M.:
  Melt pool monitoring for laser beam melting of metals: inline-evaluation and remelting of surfaces
  10th CIRP Conference on Photonic Technologies (LANE 2018)
  In: 74 2018
  DOI: 10.1016/j.procir.2018.08.052
  URL: http://www.sciencedirect.com/science/article/pii/S2212827118308369
• Köpf J., Rasch M., Meyer A., Markl M., Schmidt M., Körner C.:
  3D grain growth simulation and experimental verification in laser beam melting of IN718
  10th CIRP Conference on Photonic Technologies (LANE 2018) (Fürth, 4. September 2018 - 6. September 2018)
  In: Procedia CIRP 74 (2018) 2018
  DOI: 10.1016/j.procir.2018.08.034
  URL: https://www.sciencedirect.com/science/article/pii/S2212827118308187/pdf?md5=ea85f15a94f75d82fce787e5b0a20225πd=1-s2.0-S2212827118308187-main.pdf
• Lengenfelder B., Asraf S., Ozana N., Späth M., Schmidt M., Zalevsky Z.:
  Remote detection of Brillouin radial acoustic modes in an optical fiber using speckle-sensing
  26th International Conference on Optical Fiber Sensors (Lausanne, 24. September 2018 - 28. September 2018)
  DOI: 10.1364/OFS.2018.WF67
• Mann V., Hofmann K., Schaumberger K., Weigert T., Schuster S., Hafenecker J., Huebner S., Lipinski L., Roth S., Schmidt M.:
  Influence of oscillation frequency and focal diameter on weld pool geometry and temperature field in laser beam welding of high strength steels
  10th CIRP Conference on Photonic Technologies, LANE 2018 (Furth, 3. September 2018 - 6. September 2018)
  In: Michael Schmidt (Hrsg.): Procedia CIRP 2018
  DOI: 10.1016/j.procir.2018.08.148
• Mehari F., Lengenfelder B., Figura R., Klämpfl F., Schmidt M.:
  LIBS based Tissue Differentiation for Er:YAG Surgical Laser
  Photoptics 2018 (Funchal, 25. Januar 2018 - 27. Januar 2018)
  In: Scitepress (Hrsg.): Proceedings of the 6th International Conference on Photonics, Optics and Laser Technology 2018
  DOI: 10.5220/0006637402470251
  URL: http://www.scitepress.org/DigitalLibrary/PublicationsDetail.aspx?ID=EZ8vL8gRKLw=&t=1
• Miyamoto I., Cvecek K., Schmidt M.:
  Nonlinear absorption dynamics simulated in internal modification of glass at 532nm and 1064nm by ultrashort laser pulses
  10th CIRP Conference on Photonic Technologies, LANE 2018 (Furth, 3. September 2018 - 6. September 2018)
  In: Michael Schmidt (Hrsg.): Procedia CIRP 2018
  DOI: 10.1016/j.procir.2018.08.129
• Niese B., Geisler B., Frick T., Roth S., Schmidt M.:
  Long Term Reliability of Mechatronic Devices Generated by Fused Layer Modeling and Laser Assisted Sintering of Printed Structures
  13th International Congress Molded Interconnect Devices, MID 2018 (Wurzburg, 25. September 2018 - 26. September 2018)
  In: 2018 13th International Congress Molded Interconnect Devices, MID 2018 2018
  DOI: 10.1109/ICMID.2018.8526980
• Osmanlic F., Wudy K., Laumer T., Schmidt M., Drummer D., Körner C.:
  Modeling of Laser Beam Absorption in a Polymer Powder Bed
  In: Polymers 10 (2018)
  ISSN: 2073-4360
  DOI: 10.3390/polym10070784
• Papke T., Dubjella P., Butzhammer L., Huber F., Petrunenko O., Klose D., Schmidt M., Merklein M.:
  Influence of a bending operation on the bonding strength for hybrid parts made of Ti-6Al-4V
  10th CIRP Conference on Photonic Technologies (LANE 2018) (Fürth, 3. September 2018 - 6. September 2018)
  In: Procedia CIRP 2018
  DOI: 10.1016/j.procir.2018.08.113
• Papke T., Junker D., Huber F., Hentschel O., Schmidt M., Merklein M.:
  Verknüpfung additiver Fertigung und Umformtechnik in Form hybrider Bauteile und Werkzeuge.
  Fachtagung Werkstoffe und Additive Fertigung (Potsdam, 25. April 2018 - 26. April 2018)
  In: Witt G (Hrsg.): Tagungsband Fachtagung Werkstoffe und Additive Fertigung 2018
• Papke T., Junker D., Schmidt M., Kolb T., Merklein M.:
  Bulk Metal Forming of Additively Manufactured Elements
  5th International Conference on New Forming Technology (ICNFT 2018)
  In: 190 2018
  DOI: 10.1051/matecconf/201819003002
  URL: https://www.matec-conferences.org/articles/matecconf/abs/2018/49/matecconf_icnft2018_03002/matecconf_icnft2018_03002.html
• Schaumberger K., Mann V., Moedl M., Hofmann K., Stein S., Roth S., Schmidt M.:
  Influence of focal spot diameter and beam oscillation on the process efficiency of laser beam welding utilizing a direct diode laser
  10th CIRP Conference on Photonic Technologies, LANE 2018 (Furth, 3. September 2018 - 6. September 2018)
  In: Michael Schmidt (Hrsg.): Procedia CIRP 2018
  DOI: 10.1016/j.procir.2018.08.149
• Schaumberger K., Moedl M., Mann V., Roth S., Schmidt M.:
  Qualification of Direct Diode Lasers for Laser Beam Welding in Order to Enhance Process Efficiency
  In: Applied Mechanics and Materials 882 (2018), S. 127-134
  ISSN: 1660-9336
  DOI: 10.4028/www.scientific.net/AMM.882.127
• Schmailzl A., Quandt B., Schmidt M., Hierl S.:
  In-Situ process monitoring during laser transmission welding of PA6-GF30
  10th CIRP Conference on Photonic Technologies, LANE 2018 (Furth, 3. September 2018 - 6. September 2018)
  In: Michael Schmidt (Hrsg.): Procedia CIRP 2018
  DOI: 10.1016/j.procir.2018.08.131
• Schmidt M., Zaeh M., Li L., Duflou J., Overmeyer L., Vollertsen F.:
  Advances in macro-scale laser processing
  In: CIRP Annals - Manufacturing Technology 67 (2018), S. 719-742
  ISSN: 0007-8506
  DOI: 10.1016/j.cirp.2018.05.006
• Shih CY., Streubel R., Heberle J., Letzel A., Shugaev MV., Wu C., Schmidt M., Gökce B., Barcikowski S., Zhigilei LV.:
  Two mechanisms of nanoparticle generation in picosecond laser ablation in liquids: the origin of the bimodal size distribution
  In: Nanoscale 10 (2018), S. 6900 - 6910
  ISSN: 2040-3364
  DOI: 10.1039/c7nr08614h
• Staudt T., Eschner E., Tenner F., Schmidt M.:
  Deriving spectral information upon the laser welding process employing a hyperspectral imaging technique
  In: Procedia CIRP (2018), S. 636 - 639
  ISSN: 2212-8271
  DOI: 10.1016/j.procir.2018.08.061
  URL: http://www.sciencedirect.com/science/article/pii/S221282711830845X
• Stein S., Schaumberger K., Frick T., Roth S., Schmidt M.:
  Laser Drop on Demand Micro Joining − Analytic Process Model to Quantify Braze Absorptance and Cumulative Energy Balance
  In: Advanced Engineering Materials 20 (2018), Art.Nr.: 1800421
  ISSN: 1438-1656
  DOI: 10.1002/adem.201800421
• Stein S., Zhao W., Hentschel O., Bickmann C., Roth S., Frick T., Schmidt M.:
  Flight trajectory analysis of CuSn-droplets generated by laser drop on demand jetting, using stereoscopic high-speed imaging
  In: Optics Express 26 (2018), S. 10968-10980
  ISSN: 1094-4087
  DOI: 10.1364/OE.26.010968
• Stichel T., Frick T., Laumer T., Tenner F., Hausotte T., Merklein M., Schmidt M.:
  A Round Robin study for selective laser sintering of polymers: Back tracing of the pore morphology to the process parameters
  In: Journal of Materials Processing Technology 252 (2018), S. 537-545
  ISSN: 0924-0136
  DOI: 10.1016/j.jmatprotec.2017.10.013
• Strauß J., Heberle J., Schmidt M.:
  Laserstrahlformung mit Akustooptik
  In: Mikroproduktion (2018), S. 48-52
  ISSN: 1614-4538
  Open Access: http://www.mikroproduktion.com/uploads/media/48-52_Mikroproduktion_5_18_Uni-Erlangen-Photonische-Technologien-online.pdf
• Strauß J., Heberle J., Schmidt M.:
  Laserstrahlformung mit Akustooptik
  In: Mikroproduktion (2018), S. 48-52
  ISSN: 1614-4538
  Open Access: http://www.mikroproduktion.com/uploads/media/48-52_Mikroproduktion_5_18_Uni-Erlangen-Photonische-Technologien-online.pdf
  URL: http://www.mikroproduktion.com/uploads/media/48-52_Mikroproduktion_5_18_Uni-Erlangen-Photonische-Technologien-online.pdf
• Sun B., Salter P., Roider C., Jesacher A., Strauß J., Heberle J., Schmidt M., Booth MJ.:
  Four-dimensional light shaping: manipulating ultrafast spatiotemporal foci in space and time
  In: Light: Science & Applications 7 (2018), Art.Nr.: 17117
  ISSN: 2047-7538
  DOI: 10.1038/lsa.2017.117
• Tenner F., Eschner E., Lutz B., Schmidt M.:
  Development of a joining gap control system for laser welding of zinc-coated steel sheets driven by process observation
  In: Journal of Laser Applications (2018)
  ISSN: 1042-346X
  DOI: 10.2351/1.5040622
• Tenner J., Häfner T., Rothammer B., Krachenfels K., Zhao R., Schmidt M., Tremmel S., Merklein M.:
  Influence of laser generated micro textured coated tool surfaces on dry deep drawing processes
  In: Dry Metal Forming Open Access Journal 4 (2018), S. 35 - 46
  Open Access: http://www.drymetalforming.de/
  URL: https://www.archiv.mfk.tf.fau.de?file=pubmfk_5a869448addd0
• Tenner J., Zhao R., Tremmel S., Häfner T., Schmidt M., Merklein M.:
  Tribological Behavior of Carbon Based Coatings Adapted to Lubricant-Free Forming Conditions
  In: International Journal of Precision Engineering and Manufacturing - Green Technology 5 (2018), S. 361-367
  ISSN: 2198-0810
  DOI: 10.1007/s40684-018-0038-1

2017

• Alexeev I., Pflaum C., Schmidt M.:
  New approaches in teaching laser engineering classes - modeling and building up a laser
  DOI: 10.1117/12.2264777
• Alexeev I., Wu J., Karg M., Zalevsky Z., Schmidt M.:
  Determination of laser beam focus position based on secondary speckles pattern analysis
  In: Applied Optics 56 (2017), S. 7413-7418
  ISSN: 2155-3165
  DOI: 10.1364/AO.56.007413
• Butzhammer L., Dubjella P., Huber F., Schaub A., Aumüller M., Baum A., Petrunenko O., Merklein M., Schmidt M.:
  Experimental investigation of a process chain combining sheet metal bending and laser beam melting of Ti-6Al-4V
  Lasers in Manufacturing LIM 2017 (München, 26. Juni 2017 - 29. Juni 2017)
• Chen C., Fei Y., Zhou Q., Gong Y., Li R., Li C., Klämpfl F., Freund S., Wu X., Sun Y., Li X., Schmidt M., Ma D., Yu Y.:
  Laser beam melting 3D printing of Ti6Al4V based porous structured dental implants: fabrication, biocompatibility analysis and photoelastic study
  In: Scientific Reports 7 (2017), Art.Nr.: 45360
  ISSN: 2045-2322
  DOI: 10.1038/srep45360
  URL: http://www.nature.com/articles/srep45360
• Cvecek K., Stenglein F., Miyamoto I., Schmidt M.:
  Influence of wavelength on glass welding by ultra-short laser pulses
  In: Journal of Laser Micro Nanoengineering 12 (2017), S. 115-119
  ISSN: 1880-0688
  DOI: 10.2961/jlmn.2017.02.0012
• Gausemeier J., Schmidt M., Anderl R., Schmid HJ., Leyens C., Seliger G., Winzer P., Straube F., Kohlhuber M., Kage M., Karg M.:
  Additive Fertigung
  (2017), S. 1-64
  Open Access: http://www.acatech.de/fileadmin/user_upload/Baumstruktur_nach_Website/Acatech/root/de/Publikationen/Kooperationspublikationen/3Akad_Stellungnahme_AdditiveFertigung_2016_web.pdf
  URL: http://www.acatech.de/de/aktuelles-presse/presseinformationen-news/news-detail/artikel/akademien-legen-handlungsempfehlungen-zur-additiven-fertigung-vor.html
  (anderer)
• Hagen JF., Kohl S., Schmidt M.:
  Microscale modelling for powderbed based laser melting: A testbed for new system technology
  2017 Simulation for Additive Manufacturing, Sinam 2017 (Munich, 11. Oktober 2017 - 13. Oktober 2017)
  In: Simulation for Additive Manufacturing 2017, Sinam 2017 2017
• Heberle J., Knoll M., Häfner T., Schmidt M.:
  High-speed pump-probe imaging of ultrashort pulsed laser cutting of polymers
  In: Journal of Laser Applications 29 (2017), Art.Nr.: 022207
  ISSN: 1042-346X
  DOI: 10.2351/1.4983500
• Hentschel O., Scheitler CJ., Fedorov A., Junker D., Gorunov A., Haimerl A., Merklein M., Schmidt M.:
  Experimental investigations of processing the high carbon cold-work tool steel 1.2358 by laser metal deposition for the additive manufacturing of cold forging tools
  In: Journal of Laser Applications 29 (2017), Art.Nr.: 022307
  ISSN: 1042-346X
  DOI: 10.2351/1.4983247
• Hentschel O., Scheitler CJ., Fedorov A., Junker D., Gorunow A., Haimerl A., Merklein M., Schmidt M.:
  Experimental investigations of processing the high carbon cold-work tool steel 1.2358 by LMD for the additive Manufacturing of cold forging tools
  In: Journal of Laser Applications 29 (2017), S. 022307
  ISSN: 1042-346X
• Huber F., Rasch M., Butzhammer L., Karg M., Schmidt M.:
  Strahlschmelzen von Metallen mit unterschiedlichen Intensitäten und Belichtungsstrategien
  5. Industriekolloquium des Sonderforschungsbereichs 814 - Additive Fertigung (Nürnberg, 12. Dezember 2017 - 12. Dezember 2017)
  In: 5. Industriekolloquium des SFB 814 2017
• Häfner T., Heberle J., Hautmann H., Zhao R., Tenner J., Tremmel S., Merklein M., Schmidt M.:
  Effect of picosecond laser based modifications of amorphous carbon coatings on lubricant-free tribological systems
  In: Journal of Laser Micro Nanoengineering 12 (2017), S. 132-140
  ISSN: 1880-0688
  DOI: 10.2961/jlmn.2017.02.0015
• Häfner T., Heberle J., Holder D., Schmidt M.:
  Speckle reduction techniques in holographic beam shaping for accurate and efficient picosecond laser structuring
  In: Journal of Laser Applications 29 (2017), S. 022205
  ISSN: 1042-346X
  DOI: 10.2351/1.4983497
• Karg M., Ahuja B., Wiesenmayer S., Kuryntsev S., Schmidt M.:
  Effects of process conditions on mechanical behavior of aluminium wrought alloy EN AW-2219 (AlCu6Mn) additively manufactured by Laser Beam Melting in powder bed
  In: Micromachines 8 (2017), S. 1-11
  ISSN: 2072-666X
  DOI: 10.3390/mi8010023
  URL: http://www.mdpi.com/2072-666X/8/1/23/pdf
• Kolb T., Beisser R., Schmidt P., Tremel J., Schmidt M.:
  Safety in additive manufacturing: Fine dust measurements for a process chain in Laser beam melting of metals
  In: RTejournal - Forum für Rapid Technologie 14 (2017)
  ISSN: 1614-0923
  Open Access: https://www.rtejournal.de/ausgabe-14-2017/4626
• Lengenfelder B., Mehari F., Tang Y., Klämpfl F., Zalevsky Z., Schmidt M.:
  Towards non-contact photo-acoustic endoscopy using speckle pattern analysis
  Photonics West 2017 (BiOS) (San Francisco, 28. Januar 2017 - 3. Februar 2017)
  In: SPIE (Hrsg.): Photons Plus Ultrasound: Imaging and Sensing 2017 2017
  DOI: 10.1117/12.2250563
  URL: http://proceedings.spiedigitallibrary.org/proceeding.aspx?articleid=2608814
• Mehari F., Geißler B., Rohde M., Klämpfl F., Stelzle F., Schmidt M.:
  Laser-induced Breakdown Spectroscopy (LIBS) based tissue type mapping of ex-vivo soft tissues - A prospect for tissue specific Laser surgery
  OSA Biophotonics Congress: Optics in the Life Sciences (San Diego, Kalifornien USA, 2. April 2017 - 5. April 2017)
  In: Optical Molecular Probes, Imaging and Drug Delivery 2017 2017
• Mikschl F., Merle B., Baum M., Heberle J., Göken M., Schmidt M.:
  Micromechanical characterization of laser consolidated nanoparticle ITO layers
  In: Thin Solid Films 642 (2017), S. 214-218
  ISSN: 0040-6090
  DOI: 10.1016/j.tsf.2017.09.046
• Müller M., Hentschel O., Schmidt M., Franke J.:
  Copper circuit traces by laser cladding with powder injection for additive manufactured mechatronic devices
  18th IEEE Electronics Packaging Technology Conference, EPTC 2016 (Singapore, SGP, 30. November 2016 - 3. Dezember 2016)
  In: Proceedings of the 2016 IEEE 18th Electronics Packaging Technology Conference, EPTC 2016 2017
  DOI: 10.1109/EPTC.2016.7861551
• Palma AL., Matteocci F., Agresti A., Pescetelli S., Calabro E., Vesce L., Christiansen S., Schmidt M., Di Carlo A.:
  Laser-Patterning Engineering for Perovskite Solar Modules with 95% Aperture Ratio
  In: IEEE Journal of Photovoltaics 7 (2017), S. 1674-1680
  ISSN: 2156-3381
  DOI: 10.1109/JPHOTOV.2017.2732223
• Rapp S., Winter J., Huber HP., Schmidt M.:
  Pump-probe reflectometric and ellipsometric investigation of femtosecond laser pulse induced ablation in molybdenum
  Frontiers in Ultrafast Optics: Biomedical, Scientific, and Industrial Applications XVII 2017 (San Francisco, CA, USA, 29. Januar 2017 - 2. Februar 2017)
  In: Peter R. Herman, Alexander Heisterkamp, Michel Meunier, Roberto Osellame (Hrsg.): Proceedings of SPIE - The International Society for Optical Engineering 2017
  DOI: 10.1117/12.2253846
• Rapp S., Winter J., Huber HP., Schmidt M.:
  Ultrafast pump-probe ellipsometric measurements of transient optical properties in metals during laser ablation
  The European Conference on Lasers and Electro-Optics, CLEO_Europe 2017 (Munich, 25. Juni 2017 - 29. Juni 2017)
  In: Optics InfoBase Conference Papers 2017
• Rasch M., Huber F., Butzhammer L., Merz C., Schmidt M.:
  Einfluss der Belichtungsstrategie auf die oberflächennahe Porosität beim Laserstrahlschmelzen im Pulverbett
  Rapid.Tech – International Trade Show & Conference for Additive Manufacturing (Erfurth, 20. Juni 2017 - 22. Juni 2017)
  In: M. Kynast, M. Eichmann , G. Witt (Hrsg.): PROCEEDINGS OF THE 14TH RAPID.TECH CONFERENCE ERFURT 2017
  DOI: 10.3139/9783446454606.019
  URL: http://www.hanser-elibrary.com/doi/pdf/10.3139/9783446454606.019
• Reimann W., Dobler M., Goede M., Schmidt M., Dilger K.:
  Three-beam laser brazing of zinc-coated steel
  In: International Journal of Advanced Manufacturing Technology 90 (2017), S. 317-328
  ISSN: 0268-3768
  DOI: 10.1007/s00170-016-9361-2
• Scheitler CJ., Hentschel O., Krebs T., Nagulin KY., Schmidt M.:
  Laser metal deposition of NiTi shape memory alloy on Ti sheet metal: Influence of preheating on dissimilar build-up
  In: Journal of Laser Applications 29 (2017), Art.Nr.: 022309
  ISSN: 1042-346X
  DOI: 10.2351/1.4983246
• Schmidt M., Gausemeier J., Leyens C., Anderl R., Winzer P., Schmid HJ., Seliger G., Straube F., Kohlhuber M., Kage M., Karg M.:
  Additive Manufacturing
  (2017), S. 1-60
  URL: http://www.acatech.de/fileadmin/user_upload/Baumstruktur_nach_Website/Acatech/root/de/Publikationen/Kooperationspublikationen/3Akad_Stellungnahme_EN_AdditiveFertigung_web_FINAL.pdf
  (anderer)
• Schmidt M., Merklein M., Bourell D., Dimitrov D., Hausotte T., Wegener K., Overmeyer L., Vollertsen F., Levy GN.:
  Laser based additive manufacturing in industry and academia
  In: CIRP Annals - Manufacturing Technology 66 (2017), S. 561-583
  ISSN: 0007-8506
  DOI: 10.1016/j.cirp.2017.05.011
• Staudt T., Tenner F., Eschner E., Klämpfl F., Schmidt M.:
  Influence of vapor on hyperspectral imaging for monitoring laser-based material processing
  In: Proceedings of the 36th International Congress on Applications of Lasers & Electro-Optics - ICALEO, 2017, S. 706
  DOI: 10.2351/1.5138159
  URL: https://lia.scitation.org/doi/abs/10.2351/1.5138159
• Staudt T., Tenner F., Klämpfl F., Schmidt M.:
  Development of a hyperspectral imaging technique for monitoring laser-based material processing
  In: Journal of Laser Applications 29 (2017), S. 022601
  ISSN: 1042-346X
  DOI: 10.2351/1.4983265
• Stein S., Dippert J., Roth S., Schmidt M.:
  Laser drop on demand micro joining for high temperature wire bonding applications - system technology and mechanical joint performance
  In: Journal of Laser Micro Nanoengineering 12 (2017), S. 239-247
  ISSN: 1880-0688
  DOI: 10.2961/jlmn.2017.03.0012
• Stein S., Dobler M., Radel T., Strauß M., Breitschwerdt H., Hugger F., Roth S., Schmidt M., Schmidt M.:
  Experimental and numerical investigations regarding laser drop on demand jetting of Cu alloys
  In: Production Engineering 11 (2017), S. 275-284
  ISSN: 0944-6524
  DOI: 10.1007/s11740-017-0737-4
• Stein S., Wedler J., Rhein S., Schmidt M., Körner C., Michaelis A., Gebhardt S.:
  A process chain for integrating piezoelectric transducers into aluminum die castings to generate smart lightweight structures
  In: Results in Physics (2017)
  ISSN: 2211-3797
  DOI: 10.1016/j.rinp.2017.07.034
• Steiner J., Häfner T., Zhao R., Andreas K., Schmidt M., Tremmel S., Merklein M.:
  Analysis of tool-sided surface modifications for dry deep drawing of deep drawing steel and aluminum alloys in a model process
  In: Dry Metal Forming Open Access Journal 3 (2017), S. 30-40
  Open Access: http://elib.suub.uni-bremen.de/edocs/00105725-1.pdf
• Stelzle F., Rohde M., Riemann M., Oetter N., Adler W., Tangermann-Gerk K., Schmidt M., Knipfer C.:
  Autofluorescence spectroscopy for nerve-sparing laser surgery of the head and neck-the influence of laser-tissue interaction
  In: Lasers in Medical Science 32 (2017), S. 1289-1300
  ISSN: 0268-8921
  DOI: 10.1007/s10103-017-2240-8
• Stichel T., Frick T., Laumer T., Tenner F., Hausotte T., Merklein M., Schmidt M.:
  A Round Robin study for Selective Laser Sintering of polyamide 12: Microstructural origin of the mechanical properties
  In: Optics and Laser Technology 89 (2017), S. 31-40
  ISSN: 0030-3992
  DOI: 10.1016/j.optlastec.2016.09.042
• Strauß J., Baum M., Alexeev I., Schmidt M.:
  Optical Trap Assisted Nanopatterning: Process Parallelization and Dynamic Structure Generation
  In: Journal of Laser Micro Nanoengineering 12 (2017), S. 86-90
  ISSN: 1880-0688
  DOI: 10.2961/jlmn.2017.02.0007
  URL: http://www.jlps.gr.jp/jlmn/upload/267828b35a4a05b6fd4d0589b6b25a1c.pdf
• Tenner F., Regensburger M., Schramm A., Söhle M., Schwarzkopf K., Zalevsky Z., Schmidt M.:
  Evaluation of a laser-based sensor for the diagnosis of neurological disorders
  In: 2017 39th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC) 2017
  DOI: 10.1109/EMBC.2017.8037790
• Tenner F., Riegel D., Mayer E., Schmidt M.:
  Analytical model of the laser welding of zinc-coated steel sheets by the aid of videography
  In: Journal of Laser Applications 29 (2017), S. 022411
  ISSN: 1042-346X
  DOI: 10.2351/1.4983236
• Winter J., Rapp S., Huber HP., Schmidt M.:
  Optical dynamics in ultra-short laser pulse irradiated copper revealed by simulation and experimental measurement with time-resolved pump-probe ellipsometry
  The European Conference on Lasers and Electro-Optics, CLEO_Europe 2017 (Munich, DEU, 25. Juni 2017 - 29. Juni 2017)
  In: Optics InfoBase Conference Papers 2017
  DOI: 10.1109/CLEOE-EQEC.2017.8087226
• Winter J., Rapp S., Schmidt M., Huber HP.:
  Ultrafast laser energy deposition in copper revealed by simulation and experimental determination of optical properties with pump-probe ellipsometry
  Laser Applications in Microelectronic and Optoelectronic Manufacturing (LAMOM) XXII 2017 (San Francisco, CA, USA, 30. Januar 2017 - 2. Februar 2017)
  In: Beat Neuenschwander, Tetsuya Makimura, Costas P. Grigoropoulos, Gediminas Raciukaitis (Hrsg.): Proceedings of SPIE - The International Society for Optical Engineering 2017
  DOI: 10.1117/12.2255946
• Winter J., Rapp S., Schmidt M., Huber HP.:
  Ultrafast laser processing of copper: A comparative study of experimental and simulated transient optical properties
  In: Applied Surface Science 417 (2017), S. 2-15
  ISSN: 0169-4332
  DOI: 10.1016/j.apsusc.2017.02.070

2016

• Ahuja B., Schaub A., Junker D., Karg M., Tenner F., Plettke R., Merklein M., Schmidt M.:
  A ROUND ROBIN STUDY FOR LASER BEAM MELTING IN METAL POWDER BED
  In: South African Journal of Industrial Engineering 27 (2016), S. 30-42
  ISSN: 1012-277X
  DOI: 10.7166/27-2-1201
  URL: http://sajie.journals.ac.za/pub/article/view/1201/682
• Alexeev I., Brehm E., Nendel F., Strauß J., Baum M., Schmidt M.:
  Fabrication and Application of Phase only Holograms for High Power Laser Beam Shaping
  In: Journal of Laser Micro Nanoengineering 11 (2016), S. 261-265
  ISSN: 1880-0688
  DOI: 10.2961/jlmn.2016.02.0019
• Amend P., Häfner T., Graenitz M., Roth S., Schmidt M.:
  Effect of ultrashort pulse laser structuring of stainless steel on laser-based heat conduction joining of polyamide steel hybrids
  9th International Conference on Photonic Technologies, LANE 2016 (Fürth, 19. September 2016 - 22. September 2016)
  In: Physics Procedia 2016
  DOI: 10.1016/j.phpro.2016.08.118
• Amend P., Mallmann G., Schmitt R., Schmidt M., Roth S.:
  Process-structure-property relationship of laser-joined thermoplastic metal hybrids
  In: Journal of Laser Applications 28 (2016), Art.Nr.: 022403
  ISSN: 1042-346X
  DOI: 10.2351/1.4944099
• Bechtold P., Zimmermann M., Roth S., Alexeev I., Schmidt M.:
  Beam guidance, focal position shifting and beam profile shaping in ultrashort pulsed laser materials processing
  DOI: 10.1007/978-3-319-17659-8_12
• Buckstegge F., Michel T., Zimmermann M., Roth S., Schmidt M.:
  Advanced rock drilling technologies using high laser power
  9th International Conference on Photonic Technologies, LANE 2016 (Furth, 19. September 2016 - 22. September 2016)
  In: Physics Procedia 2016
  DOI: 10.1016/j.phpro.2016.08.035
• Chen C., Ahmed M., Häfner T., Klämpfl F., Stelzle F., Schmidt M.:
  Fabrication of a turbid optofluidic phantom device with tunable µa and μ s’ to simulate cutaneous vascular perfusion
  In: Scientific Reports (2016), Art.Nr.: 30567
  ISSN: 2045-2322
  DOI: 10.1038/srep30567
  URL: http://www.nature.com/articles/srep30567
• Cvecek K., Groeschel B., Schmidt M.:
  Process properties of electronic high voltage discharges triggered by ultra-short pulsed laser filaments
  9th International Conference on Photonic Technologies, LANE 2016
  DOI: 10.1016/j.phpro.2016.08.061
• Dobler M., Wiethop P., Schmid D., Schmidt M.:
  Simulation based analysis of laser beam brazing
  High-Power Laser Materials Processing: Lasers, Beam Delivery, Diagnostics, and Applications V (San Francisco, CA, USA, 16. Februar 2016 - 18. Februar 2016)
  In: Stefan Kaierle, Friedhelm Dorsch (Hrsg.): Proceedings of SPIE - The International Society for Optical Engineering 2016
  DOI: 10.1117/12.2211732
• Eberle G., Schmidt M., Pude F., Wegener K.:
  Laser surface and subsurface modification of sapphire using femtosecond pulses
  In: Applied Surface Science 378 (2016), S. 504-512
  ISSN: 0169-4332
  DOI: 10.1016/j.apsusc.2016.04.032
• Heberle J., Bechtold P., Strauß J., Schmidt M.:
  Electro-optic and acousto-optic laser beam scanners
  SPIE LASE (San Francisco, 13. Februar 2016 - 18. Februar 2016)
  In: Klotzbach, Udo; Washio, Kunihiko; Arnold, Craig B. (Hrsg.): Laser-based Micro- and Nanoprocessing X, Proc. SPIE 9736, Bellingham, WA: 2016
  DOI: 10.1117/12.2212208
• Heberle J., Häfner T., Schmidt M.:
  Nonlinear Absorption Measurements of Intraocular Lens Polymers by Integrating Z-scan
  In: Journal of Laser Applications 28 (2016), S. 0226041-0226046
  ISSN: 1042-346X
  DOI: 10.2351/1.4944116
• Hofmann K., Neubauer F., Holzer M., Mann V., Hugger F., Roth S., Schmidt M.:
  Effect of laser beam alloying strategies on the metallurgical and mechanical properties of hot forming tool steels
  In: Physics Procedia 83 (Hrsg.): LANE 2016 - 9. International Conference on Photonic Technologies 2016
  DOI: 10.1016/j.phpro.2016.08.023
• Holzer M., Hofmann K., Mann V., Hugger F., Roth S., Schmidt M.:
  Change of hot cracking susceptibility in welding of high strength aluminum alloy AA 7075
  9th International Conference on Photonic Technologies, LANE 2016 (Fürth, 19. September 2016 - 22. September 2016)
  In: Physics Procedia 2016
  DOI: 10.1016/j.phpro.2016.08.048
• Häfner T., Heberle J., Dobler M., Schmidt M.:
  Influences on Incubation in ps Laser Micro-machining of Steel Alloys
  In: Journal of Laser Applications Volume 28 (2016), S. 0226051-0226056
  ISSN: 1042-346X
  DOI: 10.2351/1.4944445
  URL: http://lia.scitation.org/doi/abs/10.2351/1.4944445?journalCode=jla
• Junker D., Fedorov A., Hentschel O., Schmidt M., Merklein M.:
  Connection strength of additive manufactured tool elements to the substrate
  DOI: 10.4028/www.scientific.net/KEM.716.389
• Karg M., Ahuja B., Schmidt J., Winzer B., Wirth KE., Peukert W., Schmidt M.:
  Laser Beam Melting in Powder Bed of nonspherical aluminium microparticles dry coated with metal nanoparticles
  6th International Conference on Additive Technologies (Nürnberg, 29. November 2016 - 30. November 2016)
  In: Igor Drstvenšek, Dietmar Drummer, Michael Schmidt (Hrsg.): Proceedings [Elektronski vir] / 6th International Conference on Additive Technologies iCAT2016, Ljubljana: 2016
  URL: http://icat.si
• Karg M., Hentschel O., Ahuja B., Junker D., Haßler U., Schäperkötter C., Haimerl A., Arnet H., Merklein M., Schmidt M.:
  Comparison of process characteristics and resulting microstructures of maraging steel 1.2709 in Additive Manufacturing via Laser Metal Deposition and Laser Beam Melting in Powder Bed
  6th International Conference on Additive Technologies (Nürnberg, 29. November 2016 - 30. November 2016)
• Kolb T., Urban N., Huber F., Brela M., Maurer D., Akbulut B., Donocik C., Schmidt M., Franke J.:
  Laser Beam Melting Of NdFeB For The Production Of Rare-Earth Magnets
  In: Proceedings of the 6th Electric Drives Production Conference, 2016
• Laukart A., Kohl S., Fritsche H., Grohe A., Kruschke B., Schmidt M.:
  Experimental and Numerical Investigations of Laser Beam Welding with an Ultra-high Brightness Direct-diode Laser
  In: Physics Procedia 83 (2016), S. 1397–1403
  ISSN: 1875-3892
  DOI: 10.1016/j.phpro.2016.08.146
• Laumer T., Stichel T., Nagulin K., Schmidt M.:
  Optical analysis of polymer powder materials for Selective Laser Sintering
  In: Polymer Testing 56 (2016), S. 207-213
  ISSN: 0142-9418
  DOI: 10.1016/j.polymertesting.2016.10.010
• Laumer T., Stichel T., Raths M., Schmidt M.:
  Analysis of the influence of different flowability on part characteristics regarding the simultaneous laser beam melting of polymers
  9th International Conference on Photonic Technologies, LANE 2016 (Fürth, 19. September 2016 - 22. September 2016)
  In: Physics Procedia 2016
  DOI: 10.1016/j.phpro.2016.08.098
• Laumer T., Stichel T., Schmidt M.:
  Correlation Analysis of Different Building Parameters on the Part Properties of Parts Built by Simultaneous Laser Beam Melting of Polymers
  3rd Fraunhofer Direct Digital Manufacturing Conference 2016 (DDMC2016) (Berlin, 16. März 2016 - 17. März 2016)
  In: Fraunhofer Direct Digital Manufacturing Conference DDMC 2016: Conference Proceedings 2016
  URL: https://www.researchgate.net/publication/298791419_Correlation_Analysis_of_Different_Building_Parameters_on_the_Part_Properties_of_Parts_Built_by_Simultaneous_Laser_Beam_Melting_of_Polymers
• Launhardt M., Wörz A., Loderer A., Laumer T., Drummer D., Hausotte T., Schmidt M.:
  Detecting surface roughness on SLS parts with various measuring techniques
  In: Polymer Testing 53 (2016), S. 217–226
  ISSN: 0142-9418
  DOI: 10.1016/j.polymertesting.2016.05.022
• Lechner T., Noack K., Thöne M., Amend P., Schmidt M., Will S.:
  Investigating the moisture content of polyamide 6 by Raman-microscopy and multivariate data analysis
  DOI: 10.1016/j.phpro.2016.08.134
• Lengenfelder B., Mehari F., Hoppe L., Klämpfl F., Tenner F., Zalevsky Z., Schmidt M.:
  Remote photoacoustic tomography using speckle-sensing with a high-speed camera
  Biomedical Optics Congress 2016 (Fort Lauderdale, USA, 24. April 2016 - 28. April 2016)
  In: Optcal Society America (Hrsg.): Cancer Imaging and Therapy 2016 2016
  DOI: 10.1364/CANCER.2016.JM3A.16
  URL: https://www.osapublishing.org/abstract.cfm?URI=Cancer-2016-JM3A.16
• Lippenberger M., Dengler P., Wandinger A., Schmidt M.:
  Photoresponsive liquid crystal elastomers as feedback controlled light-driven actuators - Theory, real-time behaviour, limitations
  9th International Conference on Photonic Technologies, LANE 2016 (Furth, 19. September 2016 - 22. September 2016)
  In: Physics Procedia 2016
  DOI: 10.1016/j.phpro.2016.08.137
• Mann V., Holzer M., Hofmann K., Oezkaya E., Hugger F., Roth S., Schmidt M.:
  Influence of surface coatings of filler wires on weld seam properties of laser beam welded copper connections
  9th International Conference on Photonic Technologies, LANE 2016 (Fürth, 19. September 2016 - 22. September 2016)
  In: Physics Procedia 2016
  DOI: 10.1016/j.phpro.2016.08.045
• Mehari F., Rohde M., Kanawade R., Knipfer C., Adler W., Klämpfl F., Stelzle F., Schmidt M.:
  Investigation of the differentiation of ex vivo nerve and fat tissues using laser-induced breakdown spectroscopy (LIBS): Prospects for tissue-specific laser surgery
  In: Journal of Biophotonics (2016)
  ISSN: 1864-063X
  URL: http://onlinelibrary.wiley.com/doi/10.1002/jbio.201500256/abstract
• Mehari F., Rohde M., Knipfer C., Kanawade R., Klämpfl F., Adler W., Oetter N., Stelzle F., Schmidt M.:
  Investigation of Laser Induced Breakdown Spectroscopy (LIBS) for the Differentiation of Nerve and Gland Tissue—A Possible Application for a Laser Surgery Feedback Control Mechanism
  In: Plasma Science & Technology 18 (2016), S. 654
  ISSN: 1009-0630
  Open Access: http://iopscience.iop.org/article/10.1088/1009-0630/18/6/12/pdf
  URL: http://iopscience.iop.org/article/10.1088/1009-0630/18/6/12/pdf
• Merklein M., Dubjella P., Schaub A., Butzhammer L., Schmidt M.:
  Interaction of Additive Manufacturing and Forming
  6th International Conference on Additive Technologies iCAT 2016 (Nürnberg, 29. November 2016 - 30. November 2016)
  In: Igor Drstvenšek, Dietmar Drummer, Michael Schmidt (Hrsg.): Proceedings of 6th International Conference on Additive Technologies 2016
• Merklein M., Schmidt M., Tremmel S., Andreas K., Häfner T., Zhao R., Steiner J.:
  Tailored modifications of amorphous carbon based coatings for dry deep drawing
  In: Dry Metal Forming Open Access Journal 2 (2016), S. 25-39
  Open Access: http://nbn-resolving.de/urn:nbn:de:gbv:46-00105203-10
• Mikschl F., Baum M., Schmidt M.:
  Innovative Strategies for the Removal of Organic Compounds in Nanoparticle ITO Layers
  11 (2016), S. 124 - 129
  DOI: 10.2961/jlmn.2016.01.0023
  URL: http://www.jlps.gr.jp/jlmn/upload/07ad0611042609e5e2758fc7fbb2faba.pdf
  (online publication)
• Miyamoto I., Okamoto Y., Tanabe R., Ito Y., Cvecek K., Schmidt M.:
  Mechanism of dynamic plasma motion in internal modification of glass by fs-laser pulses at high pulse repetition rate
  In: Optics Express 24 (2016), S. 25718-25731
  ISSN: 1094-4087
  DOI: 10.1364/OE.24.025718
• Neukam FW., Adler W., Rohde M., Klämpfl F., Schmidt M., Mehari F., Stelzle F.:
  The differentiation of oral soft- and hard tissues using laser induced breakdown spectroscopy – a prospect for tissue specific laser surgery
  In: Journal of Biophotonics 10 (2016), S. 1250-1261
  ISSN: 1864-063X
  DOI: 10.1002/jbio.201600153
  URL: http://onlinelibrary.wiley.com/doi/10.1002/jbio.201600153/pdf
• Niese B., Amend P., Frick T., Roth S., Schmidt M.:
  Fast and flexible production of mechatronic integrated devices by means of additive manufacturing
  12th International Congress on Molded Interconnect Devices, MID 2016 (Wurzburg, 28. September 2016 - 29. September 2016)
  In: 2016 12th International Congress Molded Interconnect Devices - Scientific Proceedings, MID 2016 2016
  DOI: 10.1109/ICMID.2016.7738927
• Niese B., Amend P., Roth S., Schmidt M.:
  Laser-based generation of conductive circuits on additive manufactured thermoplastic substrates
  9th International Conference on Photonic Technologies, LANE 2016 (Fürth, 19. September 2016 - 22. September 2016)
  In: Physics Procedia 2016
  DOI: 10.1016/j.phpro.2016.08.100
• Rapp S., Kaiser M., Schmidt M., Huber H.:
  Ultrafast pump-probe ellipsometry setup for the measurement of transient optical properties during laser ablation
  In: Optics Express 24 (2016), S. 17572-17592
  ISSN: 1094-4087
  DOI: 10.1364/OE.24.017572
  URL: http://www.opticsexpress.org/abstract.cfm?URI=oe-24-16-17572
• Rapp S., Schmidt M., Huber HP.:
  Selective femtosecond laser structuring of dielectric thin films with different band gaps: a time-resolved study of ablation mechanisms
  In: Applied Physics A-Materials Science & Processing 122 (2016), Art.Nr.: 1035
  ISSN: 0947-8396
  DOI: 10.1007/s00339-016-0571-0
• Schaub A., Ahuja B., Butzhammer L., Osterziel J., Schmidt M., Merklein M.:
  Additive Manufacturing of Functional Elements on Sheet Metal
  In: Physics Procedia 83 (2016), S. 797-807
  ISSN: 1875-3892
  DOI: 10.1016/j.phpro.2016.08.082
  URL: http://www.sciencedirect.com/science/article/pii/S1875389216301894
• Schechtel F., Reg Y., Zimmermann M., Stocker T., Knorr F., Mann V., Roth S., Schmidt M.:
  Pulsed laser processing of paper materials
  9th International Conference on Photonic Technologies, LANE 2016 (Fürth, 19. September 2016 - 22. September 2016)
  In: Physics Procedia 2016
  DOI: 10.1016/j.phpro.2016.08.006
• Scheitler CJ., Hugger F., Hofmann K., Hentschel O., Bätzler T., Roth S., Schmidt M.:
  Experimental investigation of direct diamond laser cladding in combination with high speed camera based process monitoring
  In: Journal of Laser Applications 28 (2016), Art.Nr.: 022304
  ISSN: 1042-346X
  DOI: 10.2351/1.4944004
• Scheitler CJ., Rothfelder R., Rasch M., Ahuja B., Schmidt M., Merklein C., Beer O.:
  Laser beam melting of M50NiL: Influence of inert gas flow on resulting part properties
  International Conference on Additive Technologies - icat 2016 (Nürnberg, 29. November 2016 - 30. November 2016)
  In: Igor Drstvenšek, Dietmar Drummer and Michael Schmidt. (Hrsg.): 6th INTERNATIONAL CONFERENCE ON ADDITIVE TECHNOLOGIES - iCAT 2016 - PROCEEDINGS 2016
• Schmailzl A., Hierl S., Schmidt M.:
  Gap-bridging during quasi-simultaneous laser transmission welding
  9th International Conference on Photonic Technologies, LANE 2016 (Fürth, 19. September 2016 - 22. September 2016)
  In: Physics Procedia 2016
  DOI: 10.1016/j.phpro.2016.08.113
• Shahmoon A., Strauß J., Zafri H., Schmidt M., Zalevsky Z.:
  High Resolution Fabrication of Interconnection Lines Using Picosecond Laser and Controlled Deposition of Gold Nanoparticles
  In: Physics Procedia 83 (2016), S. 188-193
  ISSN: 1875-3892
  DOI: 10.1016/j.phpro.2016.08.153
• Staudt T., Tenner F., Klämpfl F., Schmidt M.:
  Development of a hyperspectral imaging technique for monitoring laser-based material processing
  In: Proceedings of the 35th International Congress on Applications of Lasers & Electro-Optics - ICALEO, 2016, S. 2103
  DOI: 10.2351/1.4983265
• Stein S., Heberle J., Suchy M., Tenner F., Hugger F., Roth S., Schmidt M.:
  High Temperature Laser Based Drop on Demand Micro Joining of Thin Metallic Layers or Foils using Bronze Braze Preforms
  In: Journal of Laser Micro Nanoengineering 11 (2016), S. 111-116
  ISSN: 1880-0688
  DOI: 10.2961/jlmn.2016.01.0021
  URL: http://www.jlps.gr.jp/jlmn/upload/2633dd44a74cc80a417d9c07831e60ca.pdf
• Strauß J., Häfner T., Dobler M., Heberle J., Schmidt M.:
  Evaluation and Calibration of LCoS SLM for Direct Laser Structuring with Tailored Intensity Distributions
  In: Physics Procedia 83 (2016), S. 1160-1169
  ISSN: 1875-3892
  DOI: 10.1016/j.phpro.2016.08.122
  URL: http://www.sciencedirect.com/science/article/pii/S1875389216302292
• Strauß J., Vorndran M., Heberle J., Schmidt M.:
  IFTA Calculation of Frequency Patterns for Acousto Optical Laser Beam Shaping
  International Congress on Applications of Lasers & Electro–Optics (San Diego, CA, USA, 16. Oktober 2016 - 20. Oktober 2016)
• Tangermann-Gerk K., Barroso GS., Weisenseel B., Greil P., Fey T., Schmidt M., Motz G.:
  Laser pyrolysis of an organosilazane-based glass/ZrO2 composite coating system
  In: Materials & Design 109 (2016), S. 644-651
  ISSN: 0264-1275
  DOI: 10.1016/j.matdes.2016.07.102
• Tenner F., Klämpfl F., Nagulin K., Schmidt M.:
  Evaluation of process observation features for laser metal welding
  In: Optics and Laser Technology 80 (2016), S. 77 - 83
  ISSN: 0030-3992
  DOI: 10.1016/j.optlastec.2015.12.012
• Tenner F., Ramoser S., Dobler M., Zalevsky Z., Schmidt M.:
  Optical Measurement of the Connection State in Laser Brazing
  In: Physics Procedia 83 (2016), S. 1233--1243
  ISSN: 1875-3892
  DOI: 10.1016/j.phpro.2016.08.130
• Tenner F., Riegel D., Mayer E., Schmidt M.:
  Analytical Model of the Laser Welding of Zinc-coated Steel Sheets by the Aid of Videography
  ICALEO 2014 (San Diego, Kalifornien, 16. Oktober 2016 - 20. Oktober 2016)
  In: Laser Institute of America (Hrsg.): Proceedings of the 35th ICALEO 2016
• Tenner F., Schramm A., Söhle M., Regensburger M., Wirthmann E., Zalevsky Z., Schmidt M.:
  Towards a multi-sensor system for the diagnosis of neurological disorders
  In: 2016 IEEE International Conference on Advanced Intelligent Mechatronics (AIM) 2016
  DOI: 10.1109/AIM.2016.7576816
• Wegener CM., Spiehl D., Sauer HM., Mikschl F., Liu X., Kölpin N., Schmidt M., Jank M., Dörsam E., Roosen A.:
  Flexographic printing of nanoparticulate tin-doped indium oxide inks on PET foils and glass substrates
  In: Journal of Materials Science (2016)
  ISSN: 0022-2461
  DOI: 10.1007/s10853-016-9772-3